Central vacuum repair-central vacuum service-central vacuum installation


How does our central vacuum repair, central vacuum service and central vacuum installation calls work?

1. Discovering Ace Vacuums for Central Vacuum Needs
Locating Ace Vacuums for your central vacuum repair or installation needs is straightforward. If a friend or family member hasn't already raved about us, a quick online search for "central vacuum repair near me" or "central vacuum repair in Leesburg" will guide you to us. We're proud to be the go-to experts in the area.

2. Initial Contact and Expert Consultation
Dial 703-997-9292 ex2 to reach our team at Ace Vacuums Leesburg. When you call with your central vacuum concerns, a knowledgeable expert will assist you right away. Be ready with your unit's make and model for an efficient diagnosis. During this call, we'll also schedule a convenient time for our qualified technician to visit your home.

3. The Service Call Experience
Expect a courtesy call from our central vacuum technician before their arrival at the agreed time. They'll introduce themselves as an Ace Vacuums service professional, dedicated to resolving your central vacuum issues. To ensure cleanliness, they'll wear masks upon request and boot covers to keep your home spotless. Once on-site, our technician will promptly locate your unit and begin the assessment and repair process, followed by a thorough check of all inlets for optimal suction and performance.

4. Duration of the Service Call
Most central vacuum service calls are completed within 1-2 hours, depending on the repair's complexity. Our goal is to ensure a swift and efficient resolution to your vacuum issues.

5. Types of Central Vacuums Serviced
We service a wide range of central vacuum systems, including industry leaders like Beam, Electrolux, Dirt Devil, Vacumaid, Vacuflo, Husky, Nutone, MD Central, and many more. Our expertise covers a broad spectrum to meet your needs. We also have tons of parts in stock including central vacuum piping, fittings, inlet covers, pigtail hoses, direct connect hoses, central vacuum bags, attachment kits, low-voltage wiring, RC kits, and hide-a-hose attachments. 

6. Warranty and Satisfaction Assurance
Our work is backed by a 60-day warranty. If you're not satisfied with your central vacuum's performance post-service, contact us, and we'll address the issue without any hassle. Note that wear and tear items and damages from misuse, such as using the vacuum for wet or construction debris, are not covered under the warranty.

7. Replacing Your Central Vacuum
If you're considering replacing your central vacuum unit due to underperformance or cost-ineffectiveness, we're here to help. Call us at 703-997-9292 ex2 or email info@acevacuums.com to discuss replacement options and schedule your next service appointment.

At Ace Vacuums Leesburg, we're committed to providing top-notch service for your central vacuum systems. Trust us to keep your home clean and your vacuum running smoothly. 

At Ace Vacuums, we understand the importance of keeping your Central Vacuum in top shape. That's why we've developed an easy-to-use interactive diagnostic flowchart, accessible below to help you self-diagnose issues with your Central Vacuum Cleaner. This could help with central vacuum repair and service.

This user-friendly tool guides you step-by-step through a series of questions and scenarios, helping you identify common central vacuum problems and their potential solutions. Whether you're dealing with a central vacuum loss of suction, unusual noises, or any other issue, our flowchart is designed to provide immediate insights.

If you encounter any difficulties or have specific questions, especially about central vacuums repair, service & installation, don't hesitate to reach out to us. You can call our expert team at 703-997-9292 or email us at info@acevacuums.com for personalized assistance and professional advice. Trust Ace Vacuums for all your central vacuum service, repair, and installation needs!


Central Vacuum Service and Repair     Central Vacuum Service and Repair

The central vacuum repair experts you can trust at AceVacuums, We specialize in central vacuum repair, central vacuum service and central vacuum installations.
Central vacuum systems have several essential components, including a power unit, piping system, low voltage system to power the motor, a collection canister, hoses and attachments. The motor creates suction, while the piping system and inlet valves distribute that suction throughout the house.
Our central vacuum experts can repair and service all makes and models of central vacuum systems.
Our central vacuum service call includes but not limited to  comprehensive "11 point inspection process":
1)Clean Power Unit & Main Filter of your central vacuum
2) Check & Clean Secondary Filter
3) Inspect Power Unit Motor
4) Inspect Unit Electronics
5) Check Low Voltage Connections
6) Inspect All Wall Plates
7) Check Vacuum For Clogs
8) Examine Hose & Connections
9) Clean Pipes & Refresh System
10) Examine Hose Storage of your central vacuum
11) Inspect, Tighten and Replace (as needed) all machine seals.

If you are experiencing problems with your central vacuum system, we are the go-to experts in Washington DC, Maryland and Virginia area for repairing, servicing, and upgrading built-in vacuums. We will make sure you get a quick diagnosis, an expert repair done by an experienced technician, and a price unmatched by our competition. We service all brands, makes, and models of central vacuums, and are able to assist with almost any issue that should arise, such as:

We also carry a variety of central vacuum parts and accessories compatible with almost any central vacuum system, such as motors, hoses, inlets, filtration systems, power heads, and even power units from MD Manufacturing and other brands.

 We will guide you through the process, and it is our pleasure to assure you that your built-in vac system will work the way it is supposed to by thoroughly testing it before leaving your home. You can even try out some of the newest central vacuum accessories while we are there. Call us at 703 997 9292 today with your central vac problems

Troubleshooting FAQ

Can a central vacuum system be installed in my present home?

Yes! Virtually any home, from new to decades old, can enjoy the cleaning power of a central vacuum system installed in just a few hours without mess or disturbing walls by one of our professional installers. 

Can I use my central vacuum system to clean hardwood, vinyl or ceramic tile floors?

Yes! Use the bare floor tools or install one of our most popular options: the VacPan™ automatic dustpan. It's ideal for removing debris from the kitchen, bath or mudroom. Simply sweep trash towards the automatic dustpan, touch the toeswitch and use the power of your Beam to instantly remove it. No more dustpans or stooping over to pick up swept debris.

How do I maintain A Central Vacuum System?

Central vacuum systems are practically maintenance free. No lubrication or cleaning is ever required. Beam Central vacuum filters have an exclusive self-cleaning design from the makers of GORE-TEX® fabric, which is five times stronger than other leading filtration media. The filter shakes off dirt and protects the motor so a BEAM system works like new everytime. Because the filter is permanent, there is never a need to replace dirty, messy bags. Just empty the dirt receptacle two to three times per year.

How does a Central Vacuum System work?

To create lightweight, powerful cleaning, better air quality and less noise, the central vacuum power unit is typically located in the basement or garage, and is connected to convenient inlets throughout the home via vacuum tubing. Plug the hose into an inlet and the system is turned on with a switch on the hose handle. Particles are completely removed from living areas and collected in the power unit's dirt receptacle.

How does a Central System improve indoor air quality?

A Central Vacuum System has been clinically proven by the University of California at Davis to reduce allergy symptoms by as much as 61%. A central vacuum system is more effective at removing dirt and allergens because it has a larger, more powerful motor than uprights – up to five times more powerful. Unlike conventional vacuums that can recirculate dust, a Central Vacuum System removes 100% of contacted dirt, dust mites, pollen, dander and other allergens and carries them from living areas to a canister usually located in the garage – to help improve indoor air quality.

How many inlets do I need?

Most homes require only three inlets to reach every area with the hose and attachments. Each strategically located inlet lets you vacuum approximately 700 to 800 square feet. The power unit features an extra built-in inlet for easy cleaning of the area around the power unit.

How much does a Central Vacuum System cost?

A  Central Vacuum System costs much less than you might expect. The average cost for a complete system, installed in new or existing homes, starts at around $1,000. And it can add to your home's resale value. We will give you a free estimate on installing a central vacuum system in your home.

Is the hose easy to use?

Central vacuum Cleaning Sets and hoses are extremely lightweight and designed for whole-house cleaning from floor to ceiling. Unlike short, flimsy hoses found on portable vacuums, also available, crushproof hoses are created to withstand everyday kinks and twists.

Is suction power maintained throughout the whole home?

Yes! A properly installed Central Vacuum System offers the same powerful cleaning performance at every inlet whatever the distance from the power unit and won't lose suction over time.

What cleaning attachments and tools are available?

Central vacuum system offers a full complement of tools and attachments for virtually any cleaning need — from ceiling fan cleaners to handheld power brushes to mini-vac tools for cleaning computer keyboards. There are even pet grooming brushes that attach to your central vacuum hose. 

Can a broken valve door be replaced? 

  1. A broken utility on a power unit can be replaced by an authorized BEAM dealer.
  2. A broken door on a wall valve means the entire face plate of the wall valve needs to be replaced. A standard type face place (24 low volt only) can be changed by a homeowner. A powered direct connect face plate (110/120V high volt) should be replaced by an authorized central vacuum technician.

    Can a damaged hose be repaired? 

If a hose has a bad switch or a damaged handle, an authorized BEAM dealer can usually repair the hose, (if replacement parts are still available for that model.) However, a hose with a broken wire or a hose that is torn cannot be repaired to its optimum performance and it is best to replace the hose.

How and when to change a belt / When to change a brushroll? 

The brushroll should be replaced when the powerhead ceases to pick up small debris from the carpet i.e. loose thread or small pieces of paper. The belt should be replaced when the operator can feel that there is no forward pull left when the powerhead is on the carpet or operator can feel the brushroll stalls. It is best to have your authorized central vacuum dealer replace the brushroll or the belt.

I notice an odour in my central vacuum pipes. What causes this and what can I do about it? 

There are times when your central vacuum systems pipes may seem to emit an odor. This can happen due to slight moisture in your pipe, pet hair, etc. There is a product you can purchase to freshen your pipes called TORNADO wipes. These pre-moistened / scented towelettes can be sucked through your pipes from each inlet in your home and also through your automatic dustpans. The TORNADO wipes will remove minor clogs and odours.

Why won't my power unit start?
You can follow these steps if you have problems starting your unit.

  1. Using the switch on the side of the unit turn the switch to the manual position, the unit should come on immediately. If the unit comes on, proceed to step 2. If the unit does not come on, call your local central vacuum technician call 703 997 9292.
  2. Unhook the low volt wires at your vacuum cleaner unit.
  3. Make sure the switch on the side of the unit is on Auto and the unit's powercord is plugged into an electrical outlet. You may want to check to make sure the breaker or fuse to the electrical outlet is not tripped.
  4. Take a pair of needle nose pliers and insert them into the unit where you unplugged the low volt wires and squeeze lightly. If the unit comes on you can plug the low volt wires back in and proceed to step 5. If the unit does not come on when the low volt terminals are crossed, contact us at 703 997 9292.
  5. Inside each wall valve (the large hole where the hose is plugged into) are two contact pins. These pins touch the metal ring on the end of the hose when it is inserted into the wall valve. Starting at the wall valve closest to the unit, the operator can lift the door open on a wall valve and take a spoon or a quarter and touch these two contact pins simultaneously. If the unit comes on, close the valve and proceed to the next closest wall valve. If all wall valves check out to be working properly, proceed to procedure 6. At any time if the unit will not start when touching the contact pins, the homeowner can contact us at 703 997 9292.
  6. Insert your hose into a wall valve, if you have followed the previous steps and the hose fails to turn on the unit or powerhead, you need to contact your local authorized BEAM dealer for service.

Note: Always start at your vacuum and trouble shoot back to the hose. Failure at any point directs you to where the problem most likely can be found.

Why won't my power unit shut off? 

  1. Make sure the unit is in the Auto mode and that there is not a hose plugged into a wall valve.
  2. Unplug the low volt wire at the side of the unit, if the unit continues to run, the relay in the pc board is faulty and the entire pc board needs to be replaced. If the unit shuts off when the low volt wire is removed from the unit, there is a shorted or pinched low volt wire in the owners system and their BEAM dealer or installer will need to track this.

    What if I have a clogged system? 

Follow these instructions for clogged system.

  1. Empty the dirt receptacle.
  2. Use manual switch on the side of your unit to start the unit.
  3. Start at the closest wall valve to the unit and open the door to the wall valve and let a tissue be sucked from your hand. If the tissue makes it back to the dirt receptacle proceed to the next wall valve. If at any valve the tissue fails to go through to the dirt receptacle, there might be a blockage of some degree. At this point you can use another vacuum at this wall valve and try to use back suction to unclog the blockage or contact a BEAM dealer to snake the pipe.


300 Fort Evans Rd, NE
Leesburg, VA 20176

Call 703 997 9292 X 2
Open 7 days
Direction: Leesburg Store on Google Map

Acevacuums, we are a small community based business which is conveniently located in Loudoun County and Fairfax County to serve the tristate of Virginia, Maryland and DC customers. We have over 40 years of combined experience in this business. Our experienced associates will address all your concerns you may have with your vacuum cleaners and cleaning needs. We have plenty of free and easy parking.

Why Acevacuums? 95% of people buy vacuum cleaners and air purifiers from big box stores like walmart or online marketplaces like Amazon etc... But when it comes to warranty and vacuum repair works where do you go? Acevacuums, is your one stop shop for all your vacuum repair, vacuum service and vacuum warranty needs. We repair all makes and models of commercial & residential vacuum cleaners like dyson, miele, shark, bissell, riccar, kirby, electrolux, oreck, kenmore, hoover, robotic vacuums and more...We only use genuine vacuum parts for all vacuum repairs. We  offer free vacuum repair estimates and sameday vacuum repair services depending on the availability of parts.

We sell the best Vacuum cleanersAir purifiers, Robotic vacuums,  Central Vacuums,  Carpet ShampooersCommercial Vacuums, Floor polishers, Zone heaters and Fans, as per our customers requirement and budget. We will beat any competitor's price, just visit one of our vacuum stores or call us for the deals, you won't be disappointed. 

Visit Acevacuums, your authorized dealers for Bissell vacuums, Hoover vacuumsShark vacuums, Dyson vacuums, Oreck vacuums, Kirby vacuums, Miele vacuums, Riccar vacuums, Austin Air, IQAir,  Blueair, iRobot, sebo, Powr-Flite, Simplicity, Eureka and other vacuum cleaner brands.

Acevacuums are an authorized warranty center for most vacuum cleaner brands like Bissell, Oreck, Shark, Dyson, Hoover, Kenmore, Ricccar vacuum, Miele vacuum, Simplicity vacuum, Kirby. We perform the vacuum cleaner warranty works  and vacuum cleaner repair services on our premises with our experienced vacuum cleaner technician. We give free repair estimates on all vacuum cleaner repairs and vacuum services.

Acevacuums are an authorized central vacuum dealers for MD Central vacuum, NuTone central vacuum, Riccar central vacuum, Cana Vac central vacuum, Vacumaid central vacuum, Beam central vacuum systems and more. Our Acevacuums experienced central vacuum technicians does central vacuum installation, central vacuum repairs and central vacuum services. We give free estimates on all new central vacuum installations.

We sell the genuine OEM parts for vacuum cleaners like vacuum bags, vacuum filters, vacuum belts, vacuum cleaner rollers, vacuum cleaner motors, vacuum cleaner electrical cords, vacuum cleaner fans, vacuum cleaner accessories and more.

Kindly support local businesses for the betterment of our community. When you support small, locally-owned businesses, you're helping to generate economic activity, contribute to the tax base, and support the local economy. Local businesses are significant creators of jobs and they're also more likely to hire people who live locally, as opposed to relying on people commuting long distances. The money you spend at a local business is likely to stay in the community.

List of Repairs Performed

  •  Vacuum cleaner belt repair or replacement
  • Vacuum cleaner roller brush repair or replacement
  • Vacuum cleaner Filter replacements
  • Vacuum cleaner clog/loss of suction repair
  • Vacuum cleaner hose repair or replacement
  • Vacuum cleaner Cord or electrical problem repair or replacement
  • Vacuum cleaner Motor Replacements and Service
  • Vacuum cleaner parts replacements
  • Vacuum cleaner maintenance
  • Sewing Machines service and repairs
  • Central Vacuum Repairs and Service
  • Central vacuum installation
  • Free vacuum repair estimates
  • Same day repair services

Acevacuums, conveniently located to serve customers from all these cities in Fairfax, Arlington, Prince william and Loudoun counties in Virginia.

and also serving in Baileys Crossroads, Belleview, Engleside, Franconia, Greenway, Jefferson Manor, Kingstowne, Mason Neck, Merrifield, Mosby, Mount Vernon, Newington, North Springfield, Oak Hill,Pimmit, Seven Corners, Sully Station, West Springfield, Berryville, Bluemont, Blog, Boyce, Millwood, Paris, White Post, Arcola, Brambleton,Cascades, Country Side, Cascades, Dulles Greenway, Hillsboro, Lansdowne, Lucketts, Neersville, Potomac Falls, South Riding,Taylorstown, St. Louis, Unison, Washington D.C., Falls Church & More

Zip Codes: 20120, 20121, 20122, 20124, 20151, 20153, 20153, 20170, 20171, 20172, 20190, 20191, 20194, 20195, 22003, 22009, 22015, 22027, 22031, 22032, 22033, 22034, 22035, 22036, 22039, 22041, 22042, 22042, 22043, 22044, 22060, 22079, 22081, 22101, 22102, 22103, 22106, 22116, 22121, 22122, 22124, 22150, 22151, 22152, 22153, 22180, 22181, 22182, 22183, 22199, 22303, 22306, 22307, 22308, 22309, 22310, 22312, 22315, 22315, 22611, 20135, 22620, 22646, 20130, 22663, 20105, 20107, 20117, 20118, 20129, 20132, 20134, 20141, 20142, 20146, 20147, 20148, 20152, 20152, 20158, 20159, 20160, 20163, 20164, 20165, 20166, 20166, 20167, 20175, 20176, 20177, 20178, 20180, 20197.

*Acevacuums is just 20 minutes away from Washington DC and Maryland and 10 minutes away from Tyson's corner