Dyson DC25 Hose
- Product SKU: 915677-09
- Category: DYSON VACUUM PARTS

- Order within
The Dyson DC25 Hose 915677-09, turns your vacuum from just a floor cleaner, to a whole home cleaner. Tools and the wand can be attached to the hose for easy cleaning of corners, stairs, and hard to reach places. Once the hose is released from the vacuum it can stretch up to six times its original length.
Because of all the stretching that happens when using the hose, dirt tends to build up in the grooves. This causes the hose to relax and extend. When you receive you new genuine Dyson DC25 hose, do not be alarmed if it is shorter that the one you are replacing, it has not had time to relax and extend yet. With use dirt fills the grooves of the hose, which casus it to lengthen.
When vacuuming it is a good idea to remember not to vacuum up sharp objects with the Dyson DC25 hose. This can cause perforations that will cause the vacuum to lose suction, and it will let dirt and dust escape back into your home. If this does happen, the hose can be replaced without the use of tools.
Replacing the hose on your Dyson DC25 hose with anything other than genuine is not recommended. Generic hoses are not made to Dyson’s standards. These hoses have been reported to pop out of the vacuum when in use, fit poorly with other tools, colors don’t match, and thinner material used. As a result of a poor fitting generic hose, there could be a loss of suction. acevacuums.com sells only genuine Dyson parts.
To replace the Dyson DC25 hose, follow these easy steps:
- Turn off and unplug the vacuum
- Remover the power cord from the cable winder
- Lift up on the wand cap and pull the wand up as far as it will go until the wand an the hose are detached from the vacuum at the top
- Where the wand and the hose meet, there is a silver tab to push to release the hose from the wand
- Remove the clear bin, this will give you access to more easily push the tab on the bottom of the hose to release it from the vacuum.
- Once that tab is push the hose will easily be able to be pulled out
- Line up the new hose with the vacuum and push it into place
- Reconnect the wand to the hose and place it back onto the vacuum
The Dyson DC25 Hose is compatible with the following models: All Floors, Dyson Animal Exclusive, Animal MO Exclusive, Dyson Animal Plus, Dyson Animal Total Clean, Dyson Animal, Dyson Exclusive, MO Exclusive, Dyson Multi Floor, Dyson Multi Floor Exclusive,
Replacement part number for the Dyson DC25 Hose is, 915677-09.
Other Replacement part numbers the Dyson DC25 hose went under: 915677-01, 915677-02, 915677-07.
The Dyson DC25 Hose 915677-09, turns your vacuum from just a floor cleaner, to a whole home cleaner. Tools and the wand can be attached to the hose for easy cleaning of corners, stairs, and hard to reach places. Once the hose is released from the vacuum it can stretch up to six times its original length.
Because of all the stretching that happens when using the hose, dirt tends to build up in the grooves. This causes the hose to relax and extend. When you receive you new genuine Dyson DC25 hose, do not be alarmed if it is shorter that the one you are replacing, it has not had time to relax and extend yet. With use dirt fills the grooves of the hose, which casus it to lengthen.
When vacuuming it is a good idea to remember not to vacuum up sharp objects with the Dyson DC25 hose. This can cause perforations that will cause the vacuum to lose suction, and it will let dirt and dust escape back into your home. If this does happen, the hose can be replaced without the use of tools.
Replacing the hose on your Dyson DC25 hose with anything other than genuine is not recommended. Generic hoses are not made to Dyson’s standards. These hoses have been reported to pop out of the vacuum when in use, fit poorly with other tools, colors don’t match, and thinner material used. As a result of a poor fitting generic hose, there could be a loss of suction. acevacuums.com sells only genuine Dyson parts.
To replace the Dyson DC25 hose, follow these easy steps:
- Turn off and unplug the vacuum
- Remover the power cord from the cable winder
- Lift up on the wand cap and pull the wand up as far as it will go until the wand an the hose are detached from the vacuum at the top
- Where the wand and the hose meet, there is a silver tab to push to release the hose from the wand
- Remove the clear bin, this will give you access to more easily push the tab on the bottom of the hose to release it from the vacuum.
- Once that tab is push the hose will easily be able to be pulled out
- Line up the new hose with the vacuum and push it into place
- Reconnect the wand to the hose and place it back onto the vacuum
The Dyson DC25 Hose is compatible with the following models: All Floors, Dyson Animal Exclusive, Animal MO Exclusive, Dyson Animal Plus, Dyson Animal Total Clean, Dyson Animal, Dyson Exclusive, MO Exclusive, Dyson Multi Floor, Dyson Multi Floor Exclusive,
Replacement part number for the Dyson DC25 Hose is, 915677-09.
Other Replacement part numbers the Dyson DC25 hose went under: 915677-01, 915677-02, 915677-07.
Shipping Policy
Return Policy
Ace Vacuums is not responsible for any defective items or shortages in shipments not reported to us within seven days from the time of delivery. All returned items will be inspected for usage, damage, or missing parts from the original package to determine the restocking fee. When you buy a product and find that it is not what you need, you can exchange it within 30 days with the original packaging unused or return your purchase within seven days for a full refund unused from the day the item was delivered. A restocking fee may be applied of up to 50% for used goods. All goods purchased at a discounted price, including trade-ins, holiday sales, or price-match, are considered FINAL SALE goods and therefore are NOT eligible for return. No Returns on Air Purifiers. No Cash Refunds.
If you wish to return any product purchased, please contact us at 1888 606 8885 prior to returning your merchandise. We are available from Mon - Fri 10-7 PM EST
To receive a full refund for an item purchased please follow these steps:
- Call us to initiate your return and to identify the correct return shipping address and method.
- Package the item(s) to be returned in the original packaging.
- Send your returned item(s) shipping prepaid to within 15 days of purchase for a refund. Unauthorized or COD returns will not be accepted.
Please allow 1-2 weeks for return processing.
Please note that all products purchased from us must be returned within 15 days of purchase for a refund. We will pay for return freight only if the return is a result of our error (incorrect product shipped, product defect, etc.).