Eureka Brush Roll Part # 60959

Product Review:

Overview

The Eureka Brush Roll Part #60959 is a replacement part designed for specific Eureka vacuum models, particularly in the lightweight series.The Eureka Brush Roll Part #60959 is a replacement component designed for specific Eureka vacuum models, particularly those in the 400, 402, and 570 lightweight series.

Product Overview:

• Part Number: 60959
• Type: Brush roll (rotating brush)
• Compatibility: This brush roll is designed for various Eureka lightweight vacuum models, including the 400, 402, and 570 series, such as:
  • Eureka 400A, 402A, 402A-1, 402A-2
  • Eureka 570A, 570A-1, 570B
• Function: The brush roll helps with deep cleaning by agitating dirt and debris from carpets and floors.

Key Features:

1. Durable Construction: Made of strong plastic and bristles to ensure long-lasting performance.
2. Easy Installation: Designed for easy replacement with most Eureka models in the compatible series.
3. Improved Cleaning Efficiency: Helps enhance vacuum performance by agitating dust and dirt deep into carpet fibers.

Maintenance and Care:

• Regular Cleaning: It is important to clean the brush roll regularly to prevent hair and debris buildup, which could affect its performance. You can remove hair or strings that may wrap around the bristles using scissors or a small comb.
• Check for Wear and Tear: Over time, the bristles on the brush roll can wear down, reducing its effectiveness. If you notice reduced cleaning performance, replacing the brush roll is recommended.

FAQ:

1. How do I replace the Eureka brush roll part #60959?

   • Step 1: Turn off the vacuum and unplug it for safety.
   • Step 2: Remove the bottom plate or access door from the vacuum (typically using screws or clips).
   • Step 3: Take out the old brush roll by sliding it out of place.
   • Step 4: Insert the new brush roll in the same position.
   • Step 5: Reattach the bottom plate or access door.

2. Why is my brush roll not spinning properly?

   • There may be debris blocking the brush roll, or the drive belt might be loose or broken. Check for any blockages, and ensure the belt is in good condition and properly aligned.

3. How often should I replace the brush roll?

   • Brush rolls should be replaced if they become worn, damaged, or if cleaning and maintenance don't restore their performance. Regular checks for debris build-up can also help extend their lifespan.

4. Can I use this brush roll in any Eureka vacuum model?

   • No, this part is only compatible with certain Eureka models in the 400, 402, and 570 series. Always check your model number and the manufacturer’s guide before purchasing replacement parts.

5. How do I clean the brush roll?

   • Turn off the vacuum, remove the brush roll, and use scissors or a cleaning tool to cut away any tangled hair or debris. You can wipe the bristles with a cloth and remove any dirt buildup.

Customer Reviews:

The brush roll generally receives positive feedback for its fit and functionality. Users have reported that it is durable and works well to restore suction and cleaning power when the old brush roll is worn or damaged. However, like any replacement part, its performance depends on proper maintenance and use.

Additional Tips:

• Belt Check: In addition to the brush roll, ensure that the drive belt is also in good condition, as it is responsible for turning the brush roll. If the belt is broken or loose, the brush roll may not spin.
• User Manual: Always refer to your vacuum's user manual for specific instructions about your model and compatible parts.

Product Description:

The Eureka Brush Roll Part #60959 is a replacement part for specific Eureka vacuum models. This part helps maintain the vacuum’s cleaning efficiency, ensuring optimal performance by agitating dirt and debris from carpets and floors.

Buy Eureka Brush Roll Part # 60959 for $13.7 from Ace Vacuums

  Features:-   Fits model series: 400, 402 and 570 lightweights

Ace Vacuums Locations:

• Fairfax, VA: 11110 Main Street, Fairfax, VA 22030
• Leesburg, VA: 300 Fort Evans Rd NE, Leesburg, VA 20176

Driving Directions to Ace Vacuums in Fairfax, VA (11110 Main Street, Fairfax, VA 22030)

From Maryland (e.g., Bethesda, Silver Spring, Rockville):

1. Start on I-495 S (Capital Beltway Inner Loop): Head south on I-495 towards Northern Virginia.
2. Take Exit 45 A-B for VA-267 W (Dulles Toll Road): Follow signs for VA-267 West (Dulles Toll Road). Be aware this is a toll road.
3. Continue on VA-267 W: Stay on the Dulles Toll Road for several miles.
4. Take Exit 16 for VA-7 E (Leesburg Pike) / VA-123 S (Chain Bridge Rd): Follow signs for VA-123 South (Chain Bridge Rd).
5. Merge onto VA-123 S (Chain Bridge Rd): Continue south on Chain Bridge Road.
6. Turn Right onto Main Street (VA-236 W): This will be a significant intersection. You'll continue on Main Street for a short distance.
7. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store. Look for their prominent signage.

From Washington D.C. (e.g., Downtown D.C.):

1. Take I-66 W toward Vienna/Centreville/Fairfax: Get onto I-66 West.
2. Take Exit 60 for VA-123 S (Chain Bridge Rd) toward Fairfax: Follow the exit ramp.
3. Turn Right onto VA-123 S (Chain Bridge Rd): Continue south on Chain Bridge Road.
4. Turn Right onto Main Street (VA-236 W): This will be a significant intersection.
5. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store.

From Northern Virginia (e.g., Arlington, Falls Church, Vienna):

• From Arlington/Falls Church:
  1. Take US-50 W (Arlington Blvd) or VA-236 W (Main Street) directly into Fairfax: Depending on your starting point, either of these roads will lead you directly to Fairfax.
  2. Continue on Main Street (VA-236 W):
  3. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store.
• From Vienna:
  1. Take VA-123 S (Chain Bridge Rd) toward Fairfax: Head south on Chain Bridge Road.
  2. Turn Right onto Main Street (VA-236 W):
  3. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store.
• From Areas West/Northwest of Fairfax (e.g., Chantilly, Centreville):
  1. Take US-50 E or I-66 E towards Fairfax.
  2. If on I-66 E, take Exit 60 for VA-123 S (Chain Bridge Rd). Turn left onto Chain Bridge Rd, then right onto Main Street.
  3. If on US-50 E, turn right onto Main Street (VA-236 E) in Fairfax.
  4. Ace Vacuums Fairfax: Ace Vacuums will be on your right side if coming from US-50 E/VA-236 E, shortly after crossing VA-123. Look for Havertys Furniture Store on your left.

Driving Directions to Ace Vacuums in Leesburg, VA (300 Fort Evans Rd NE, Leesburg, VA 20176)

From Maryland (e.g., Bethesda, Silver Spring, Rockville):

1. Start on I-495 S (Capital Beltway Inner Loop): Head south on I-495 towards Northern Virginia.
2. Take Exit 45 A-B for VA-267 W (Dulles Toll Road): Follow signs for VA-267 West (Dulles Toll Road). Be aware this is a toll road.
3. Continue on VA-267 W (Dulles Toll Road/Dulles Greenway): Stay on VA-267 West. This road transitions from the Dulles Toll Road to the Dulles Greenway as you head further west into Loudoun County. Tolls apply for both sections.
4. Take Exit 1A for VA-7 W (Harry Byrd Hwy) toward Leesburg: This is a major exit.
5. Continue on VA-7 W: You'll drive for several miles, passing through Sterling and Ashburn.
6. Take the Exit for Battlefield Parkway / Fort Evans Road: As you approach Leesburg, look for this exit.
7. Turn Right onto Fort Evans Rd NE: After exiting, turn right onto Fort Evans Road NE.
8. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.

From Washington D.C. (e.g., Downtown D.C.):

1. Take I-66 W toward Vienna/Centreville: Get onto I-66 West.
2. Merge onto VA-267 W (Dulles Toll Road): Follow signs for VA-267 West (Dulles Toll Road). Tolls apply.
3. Continue onto VA-267 W (Dulles Greenway): Stay on the Dulles Greenway. Tolls apply.
4. Take Exit 1A for VA-7 W (Harry Byrd Hwy) toward Leesburg:
5. Continue on VA-7 W:
6. Take the Exit for Battlefield Parkway / Fort Evans Road:
7. Turn Right onto Fort Evans Rd NE:
8. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.

From Northern Virginia (e.g., Fairfax, Arlington, Ashburn, Sterling):

• From Fairfax:
  1. Take VA-123 N (Chain Bridge Rd) to access VA-267 W (Dulles Toll Road) or take I-66 W to VA-267 W: Your best bet is to get onto VA-267 West (Dulles Toll Road).
  2. Continue on VA-267 W (Dulles Toll Road/Dulles Greenway): Tolls apply.
  3. Take Exit 1A for VA-7 W (Harry Byrd Hwy) toward Leesburg:
  4. Continue on VA-7 W:
  5. Take the Exit for Battlefield Parkway / Fort Evans Road:
  6. Turn Right onto Fort Evans Rd NE:
  7. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.
• From Ashburn / Sterling / Eastern Loudoun County:
  1. Take VA-7 W (Harry Byrd Hwy) directly toward Leesburg: This is the most direct route.
  2. Take the Exit for Battlefield Parkway / Fort Evans Road:
  3. Turn Right onto Fort Evans Rd NE:
  4. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.
• From Western Virginia (e.g., Winchester):
  1. Take US-7 E (Harry Byrd Hwy) toward Leesburg:
  2. In Leesburg, after passing the Leesburg Premium Outlets on your left, prepare for the Fort Evans Road / Battlefield Parkway exit.
  3. Take the Exit for Fort Evans Road / Battlefield Parkway.
  4. Turn Left onto Fort Evans Rd NE: You'll go over VA-7.
  5. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot.

Shipping Policy

Return Policy

• Report Issues Promptly: Inspect your shipment upon arrival. Any shortages or defects must be reported within 7 days of delivery or they cannot be addressed.

• Return Window: Unused items in their original packaging may be returned within 15 days of delivery for a full refund. After 15 days and up to 30 days, only an exchange or store credit is offered, provided the item is unused and in its original packaging. Products returned beyond 30 days will not be accepted.

• Restocking Fees: A standard restocking fee of 15 % applies to all approved returns. Used, damaged, or incomplete items may incur a restocking fee of up to 50 % or be refused entirely.

• Final Sale Items: All discounted items, trade‑ins, holiday promotions, price‑matched goods, and air purifiers are final sale and not eligible for return or exchange.

• No Cash Refunds: Refunds will be issued to the original payment method. Shipping charges are non‑refundable and return shipping is the customer’s responsibility unless the return is due to our error.

• Return Authorization Required: Before returning any item, you must contact our customer service at 1‑888‑606‑8885 (Mon–Fri, 10 a.m.–7 p.m. EST) to obtain return instructions and the correct return address. Unauthorized or COD returns will not be accepted.

• Processing Time: Once your return is received and inspected, please allow up to 10 business days for processing.
  
  We recommend including a copy of your receipt and your contact information with all returns to ensure prompt service.