Hammerhead Pet Hair Vacuum Tool 32-1036-08
- Product SKU: 32-1036-08
- Category: Pet Products
- Order within
Quick Summary
The Hammerhead pet-hair vacuum tool brings a wide cleaning face to sofas, carpeted stairs and vehicle interiors. Its flexible polymeric-silicone contact surface helps pull embedded hair, lint and loose debris toward the vacuum opening. The tool is designed for a backward pulling motion, making it useful for larger upholstery sections where a narrow crevice attachment would take more passes.
This listing is the complete Hammerhead tool, Ace Vacuums item 32-1036-08. A replacement cleaning insert is a separate item. A vacuum, hose and any separately required adapter are not included.
Fit and Compatibility
Buff Brite specifies a connection for nominal 1¼-inch / 32 mm and 1½-inch vacuum setups. Check the actual hose end and whether it fits over or inside an accessory connection before ordering. A nominal hose size alone does not establish compatibility with a proprietary latch, oval connection or special locking system.
Existing Fur-Eel-compatible adapters may provide the necessary connection, but confirm the individual adapter and vacuum combination. Do not force the tool onto a fitting that is too large, and do not assume every central vacuum or shop vacuum uses the same hose end.
Key Features
- Approximately 6-inch-wide cleaning path.
- Flexible polymeric-silicone cleaning surface.
- Designed to pull hair and debris from suitable upholstery.
- Wide body for furniture, vehicle mats and larger fabric-covered areas.
- Removable cleaning insert supports replacement when needed.
- Complete tool listing under item number 32-1036-08.
How the Hammerhead Works
The cleaning face makes contact with the material while the connected vacuum collects loosened debris. The manufacturer directs a backward dragging motion. Work in controlled passes rather than pushing hard or repeatedly scrubbing a small patch.
The tool's friction-based contact is different from a powered rotating brush. Your vacuum still needs an open airflow path and its normal maintenance. Empty the bin or change the bag as required and check filters according to the vacuum manual. A restricted machine can limit pickup even when the attachment is clean.
Best Uses and Limitations
The wide head is a practical choice for accessible sofa cushions, vehicle seating and carpeted steps when their care instructions permit the method. A smaller tool may be easier to position in a narrow seam, around seat hardware or between closely spaced cushions. Match the size of the head to the space you need to clean.
Test on an inconspicuous area before working across a visible surface. Delicate fabrics, loose threads, fringe and worn upholstery require particular care. Avoid excessive pressure and stop if the material pulls, snags or changes appearance. The product is an upholstery-cleaning attachment, not an animal-grooming tool.
Installation and Care
Switch off the vacuum before fitting or removing an accessory. Connect the Hammerhead using an appropriate fit or adapter and make sure it seats securely. Follow the vacuum's instructions for hose use and keep the machine stable while cleaning above the floor.
Disconnect the attachment before clearing hair from the opening or inspecting the cleaning insert. Remove debris gently without cutting or tearing the flexible surface. Follow the manufacturer's cleaning directions. Avoid solvents or heat that have not been approved for the material.
Inspect the insert periodically for wear or damage. When replacing it, choose the Hammerhead-specific refill and follow its fitting instructions. A smaller Fur-Eel refill is not automatically interchangeable with this wider head. Store the tool where its flexible edge and connector are protected from heavy objects.
Technical Specifications
| Product | Hammerhead pet-hair vacuum attachment |
|---|---|
| Ace Vacuums item | 32-1036-08 |
| Cleaning path | Approximately 6 inches |
| Contact material | Polymeric silicone |
| Use motion | Controlled backward pull |
| Connection | Nominal 1¼-inch / 32 mm and 1½-inch setups; confirm fitting |
| Contents | One complete tool |
Frequently Asked Questions
Is this only the replacement insert?
No. Item 32-1036-08 is the complete Hammerhead tool.
How wide is the cleaning path?
The manufacturer describes an approximately 6-inch path.
Does it have a powered brush roll?
No. It uses a flexible contact surface with the connected vacuum's suction.
Which direction should I move it?
Use the manufacturer's recommended backward pulling motion with controlled pressure.
Will it fit my vacuum?
Check the actual hose-end dimensions and connection style. Some systems require a separate adapter.
Can I use it on a car seat?
Use it only where the seat material permits the cleaning method, and test a hidden area first.
Can it groom my dog?
No. This listing is for cleaning suitable household and vehicle surfaces.
Where can I buy it?
Order through Ace Vacuums and check current Fairfax and Leesburg pickup options.
Quick Summary
The Hammerhead pet-hair vacuum tool brings a wide cleaning face to sofas, carpeted stairs and vehicle interiors. Its flexible polymeric-silicone contact surface helps pull embedded hair, lint and loose debris toward the vacuum opening. The tool is designed for a backward pulling motion, making it useful for larger upholstery sections where a narrow crevice attachment would take more passes.
This listing is the complete Hammerhead tool, Ace Vacuums item 32-1036-08. A replacement cleaning insert is a separate item. A vacuum, hose and any separately required adapter are not included.
Fit and Compatibility
Buff Brite specifies a connection for nominal 1¼-inch / 32 mm and 1½-inch vacuum setups. Check the actual hose end and whether it fits over or inside an accessory connection before ordering. A nominal hose size alone does not establish compatibility with a proprietary latch, oval connection or special locking system.
Existing Fur-Eel-compatible adapters may provide the necessary connection, but confirm the individual adapter and vacuum combination. Do not force the tool onto a fitting that is too large, and do not assume every central vacuum or shop vacuum uses the same hose end.
Key Features
- Approximately 6-inch-wide cleaning path.
- Flexible polymeric-silicone cleaning surface.
- Designed to pull hair and debris from suitable upholstery.
- Wide body for furniture, vehicle mats and larger fabric-covered areas.
- Removable cleaning insert supports replacement when needed.
- Complete tool listing under item number 32-1036-08.
How the Hammerhead Works
The cleaning face makes contact with the material while the connected vacuum collects loosened debris. The manufacturer directs a backward dragging motion. Work in controlled passes rather than pushing hard or repeatedly scrubbing a small patch.
The tool's friction-based contact is different from a powered rotating brush. Your vacuum still needs an open airflow path and its normal maintenance. Empty the bin or change the bag as required and check filters according to the vacuum manual. A restricted machine can limit pickup even when the attachment is clean.
Best Uses and Limitations
The wide head is a practical choice for accessible sofa cushions, vehicle seating and carpeted steps when their care instructions permit the method. A smaller tool may be easier to position in a narrow seam, around seat hardware or between closely spaced cushions. Match the size of the head to the space you need to clean.
Test on an inconspicuous area before working across a visible surface. Delicate fabrics, loose threads, fringe and worn upholstery require particular care. Avoid excessive pressure and stop if the material pulls, snags or changes appearance. The product is an upholstery-cleaning attachment, not an animal-grooming tool.
Installation and Care
Switch off the vacuum before fitting or removing an accessory. Connect the Hammerhead using an appropriate fit or adapter and make sure it seats securely. Follow the vacuum's instructions for hose use and keep the machine stable while cleaning above the floor.
Disconnect the attachment before clearing hair from the opening or inspecting the cleaning insert. Remove debris gently without cutting or tearing the flexible surface. Follow the manufacturer's cleaning directions. Avoid solvents or heat that have not been approved for the material.
Inspect the insert periodically for wear or damage. When replacing it, choose the Hammerhead-specific refill and follow its fitting instructions. A smaller Fur-Eel refill is not automatically interchangeable with this wider head. Store the tool where its flexible edge and connector are protected from heavy objects.
Technical Specifications
| Product | Hammerhead pet-hair vacuum attachment |
|---|---|
| Ace Vacuums item | 32-1036-08 |
| Cleaning path | Approximately 6 inches |
| Contact material | Polymeric silicone |
| Use motion | Controlled backward pull |
| Connection | Nominal 1¼-inch / 32 mm and 1½-inch setups; confirm fitting |
| Contents | One complete tool |
Frequently Asked Questions
Is this only the replacement insert?
No. Item 32-1036-08 is the complete Hammerhead tool.
How wide is the cleaning path?
The manufacturer describes an approximately 6-inch path.
Does it have a powered brush roll?
No. It uses a flexible contact surface with the connected vacuum's suction.
Which direction should I move it?
Use the manufacturer's recommended backward pulling motion with controlled pressure.
Will it fit my vacuum?
Check the actual hose-end dimensions and connection style. Some systems require a separate adapter.
Can I use it on a car seat?
Use it only where the seat material permits the cleaning method, and test a hidden area first.
Can it groom my dog?
No. This listing is for cleaning suitable household and vehicle surfaces.
Where can I buy it?
Order through Ace Vacuums and check current Fairfax and Leesburg pickup options.
Visit Our Showrooms
Check real-time traffic and travel time from your location in VA, DC, or MD.
📍 AceVacuums Fairfax (DMV Hub)
Address: 11110 Main St, Fairfax, VA 22030
Landmark: Opposite Havertys Furniture Store
Best for: Bethesda, Potomac, Arlington, NW Washington D.C.
📍 AceVacuums Leesburg
Address: 300 Fort Evans Rd NE, Suite 104, Leesburg, VA 20176
Landmark: Next to Home Depot in Leesburg
Best for: Ashburn, Sterling, Frederick MD, Loudoun County
Shipping, Return & Refund Policy
Shipping Policy
In-stock merchandise generally ships from our Leesburg, Virginia location within 3–5 business days. Processing time is separate from carrier transit time and is not a guaranteed delivery date. Weekends and holidays can affect timing. Special-order, backordered or unavailable items may take longer; contact us to confirm timing before purchase when a deadline matters.
Shipping options and charges are shown at checkout. After dispatch, follow the carrier's tracking updates. Weather, carrier delays, order verification and inventory confirmation may affect delivery. Inspect packages promptly and retain packaging if there is damage or an incorrect or missing item.
Returns and refunds
Eligible unused items have a 30-calendar-day return request window for refunds or exchanges, measured from delivery or in-store purchase. Return authorization is required. Final-sale exclusions, the 15% restocking fee for change-of-mind returns and shipping responsibilities are explained in our Return and Refund Policy. That policy is the governing source for return eligibility and fees.
For shipping or return help, email sales@acevacuums.com or call 703-997-9292.
30-Day Returns, Refunds and Exchanges
Updated September 27, 2026. Request a return for an eligible unused item within 30 calendar days of delivery (or purchase for items collected in store). Eligible returns may be refunded to the original payment method or exchanged, subject to availability. The same 30-day request window applies to both refunds and exchanges; there is no separate seven-day or 15-day refund deadline.
Eligibility and authorization
Items must be unused, clean, complete and in their original packaging with all accessories, manuals and proof of purchase. Contact sales@acevacuums.com or 703-997-9292 before sending anything back. Include your order number, item and reason for return. We will confirm eligibility, charges and return instructions. Unapproved or cash-on-delivery returns are not accepted.
Fees and shipping
For an approved change-of-mind return, a 15% restocking fee applies to the returned merchandise price. Original shipping charges are not refundable and the customer pays return shipping. These charges do not apply to an approved return caused by our shipping error or a damaged/defective item claim. Contact us first so we can arrange the appropriate remedy and shipping instructions. Do not assume a prepaid label is included.
Final-sale and excluded items
Air purifiers; discounted, clearance, trade-in, holiday-sale and price-matched purchases; gift cards; custom or special-order products; electrical parts; used or installed items; opened cleaning solutions; and used bags, filters, belts or other consumables are not eligible for change-of-mind returns. Other items clearly marked final sale at purchase are also excluded. An opened box alone does not disqualify an otherwise eligible unused, complete item, but consumables and cleaning solutions must remain unopened.
Damaged, defective, incorrect or missing items; recalls
Inspect your order promptly and contact us as soon as you discover a problem, with your order number and photos where helpful. Keep the packaging. Change-of-mind exclusions and deadlines do not remove applicable defect, warranty, recall or statutory rights. Warranty coverage requires evaluation under the manufacturer's terms; dealer status does not guarantee free repair. Recalled products must follow the manufacturer's recall process.
Refund timing and exchanges
After we receive and inspect the return, we will notify you of approval or the reason it cannot be accepted. Approved refunds are issued to the original payment method within 10 business days of approval; your bank may take additional time to post them. Contact us if more than 15 business days have passed since approval. Exchanges require authorization and replacement availability; any price difference and applicable charges will be explained before processing.
Applicable rights and earlier purchases
This policy applies to online and in-store purchases. We will honor more favorable written return terms provided with an earlier purchase. Applicable consumer rights remain unaffected. Where the European Union 14-day cancellation right applies, customers may cancel or return eligible orders within 14 days of receipt, subject to applicable legal exceptions, without giving a reason.
The DMV’s Trusted Vacuum Service Authority
For 25+ years, Ace Vacuums has filled the gap left by big-box retailers. We provide the expert repairs, warranty support, and genuine OEM parts that Amazon and Walmart simply don't offer. From free estimates to same-day service, we are your local alternative for professional home care solutions.
Expert Repairs
- • Vacuum Belt & Roller Repair
- • Motor Service & Replacement
- • Suction Loss & Clog Removal
- • HEPA Filter & Bag Replacement
- • Central Vacuum Installation
- • Central Vacuum Repair
- • Free Repair Estimates
Authorized Center
- • Miele & SEBO Warranty
- • Dyson & Riccar Specialists
- • Shark, Bissell & Hoover
- • Kirby & Oreck Rebuilds
- • MD & Beam Central Vac
- • Austin Air & Blueair
- • Simplicity & Electrolux
Northern Virginia
Regional Reach
Conveniently serving Washington D.C. and Maryland (Montgomery & Prince George's Counties). Our showrooms are just 20 minutes from DC and 10 minutes from Tysons Corner.
Hablamos Español — Service in English & Spanish.
Serving Zip Codes: 20147, 20176, 22030, 22031, 20151, 20190, 22102, 22314, 20110, 20148 & surrounding areas. All repairs performed by certified technicians using genuine parts.
