Sebo Mounting Clip with Screw for Dusting Brush (1387GS), 370 & 300/350 #1081GS
- Product SKU: 1081GS
- Category: SEBO Vacuum Parts, Vacuum Parts & Accessories
- Order within
Quick Summary
The SEBO Mounting Clip with Screw #1081GS is a genuine OEM replacement part designed to hold the SEBO 1387GS Dusting Brush on compatible SEBO upright vacuum cleaners. It provides a convenient storage location for the dusting brush, helping keep the accessory attached to the vacuum and readily accessible when needed.
Designed for the SEBO 300 Mechanical, 350 Mechanical, 370 Comfort, and Electronic 370 models, this gray/black mounting clip replaces a damaged, broken, loose, or missing original accessory holder.
The mounting clip is supplied with its screw, making it a practical replacement for restoring the intended dusting-brush storage arrangement.
This gray/black mounting clip is specified for the SEBO 300, 350, and 370 series. It includes the mounting screw for installation.
Available from Authorized SEBO Dealer Ace Vacuums.
Compatible Models
The SEBO #1081GS mounting clip is specified for the following vacuum models:
-
SEBO 300 Mechanical
-
SEBO 350 Mechanical
-
SEBO 370 Comfort
-
SEBO Electronic 370
Compatible dusting brush: SEBO 1387GS
The 1387GS is SEBO's gray/black dusting brush with horsehair bristles. The #1081GS mounting clip provides its designated storage attachment on compatible vacuum models.
Important Fitment Information
Although the part is associated with the 300, 350, and 370 model families, always confirm the exact model and existing accessory arrangement before ordering. SEBO uses different mounting clips for different vacuum designs and accessory configurations.
This part should not be confused with other SEBO mounting clips, such as:
-
#6694GS: Mounting clip for K and E dusting brush applications.
-
#5460GS: Mounting clip with screw for specified X and G models.
-
#1081GS: Mounting clip with screw for the 1387GS dusting brush on compatible 300, 350, and 370 models.
If you are unsure which clip your vacuum requires, contact Ace Vacuums with your model number or a photograph of the existing mounting area.
Key Features
-
Genuine SEBO OEM replacement: Original manufacturer mounting clip identified by part number #1081GS.
-
Designed for SEBO 1387GS Dusting Brush: Provides the designated mounting point for storing the compatible dusting brush on the vacuum cleaner.
-
Compatible with selected SEBO models: Specified for SEBO 300 Mechanical, 350 Mechanical, 370 Comfort, and Electronic 370 vacuum models.
-
Mounting screw included: Supplied with the screw required to secure the clip to the designated mounting position.
-
Gray/black finish: Matches the specified color of this SEBO replacement component.
-
Convenient accessory storage: Keeps the dusting brush attached to the vacuum, making it easier to locate and access during cleaning.
-
Replacement for damaged clips: Suitable for replacing a cracked, broken, loose, or missing original mounting holder.
-
Maintains the original accessory arrangement: Helps restore the intended onboard storage position for the SEBO dusting brush.
-
Model-specific fitment: Designed for the listed SEBO 300, 350, and 370 models; checking the vacuum model number before ordering is recommended.
-
Authorized dealer support: Available from Authorized SEBO Dealer Ace Vacuums for genuine SEBO replacement parts and fitment assistance.
Why Genuine OEM Parts Matter
Using genuine SEBO replacement parts helps maintain the intended fit and design of your vacuum cleaner. Small components such as mounting clips may not directly affect suction, but they contribute to accessory organization and everyday convenience.
Correct Fit and Compatibility
The #1081GS is identified for specific SEBO 300, 350, and 370 models. Choosing the correct mounting clip helps ensure that the replacement is appropriate for the vacuum's original accessory-storage arrangement.
Designed for the Specified Accessory
This mounting clip is associated with the SEBO 1387GS Dusting Brush. Using the designated part helps maintain the intended relationship between the vacuum and its onboard cleaning accessory.
Maintains Convenient Accessory Storage
A properly fitted clip keeps the dusting brush attached to the machine when it is not in use. This reduces the need to store the accessory separately and makes it easier to locate during routine cleaning.
Original Manufacturer Replacement
A genuine SEBO component is designed according to the manufacturer's equipment specifications. It is a suitable choice when replacing a damaged or missing original clip.
Purchase genuine replacement components from Authorized SEBO Dealer Ace Vacuums for product guidance and assistance identifying the correct SEBO part.
Replacement Guidance
The mounting clip is a small component, but damage or loss can make it difficult to keep the dusting brush stored on the vacuum.
When Should the Mounting Clip Be Replaced?
Consider replacing the existing clip if:
-
The plastic mounting clip is cracked or broken.
-
The dusting brush no longer stays attached to the vacuum.
-
The clip has become loose or detached.
-
The mounting screw is missing or the holder cannot be secured properly.
-
The original accessory holder has been lost during use or maintenance.
-
The dusting brush storage arrangement needs to be restored after repair.
Installation Considerations
Before installing the replacement:
-
Switch off and unplug the vacuum cleaner.
-
Locate the original dusting-brush mounting position.
-
Remove the damaged clip and existing hardware as needed.
-
Compare the replacement clip with the original mounting location.
-
Position the #1081GS clip and secure it using the supplied screw.
-
Check that the clip is firmly mounted and that the compatible dusting brush can be stored properly.
Avoid overtightening the screw or forcing the clip into position. If the mounting area is damaged, inspect it before installing the replacement.
Fitment reminder: Confirm your vacuum model and part number before ordering. The 1387GS dusting brush is not included with the mounting clip unless specifically stated in the product package details.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SEBO |
| Product Name | Mounting Clip with Screw for Dusting Brush |
| Manufacturer Part Number | 1081GS |
| SKU | 1081GS |
| Product Type | Dusting Brush Mounting Clip |
| Compatible Accessory | SEBO 1387GS Dusting Brush |
| Compatible Models | 300 Mechanical, 350 Mechanical, 370 Comfort, Electronic 370 |
| Compatible Series | SEBO 300, 350, and 370 |
| Color | Gray/Black |
| Mounting Hardware | Screw included |
| Construction | OEM mounting component |
| Replacement Category | Vacuum Cleaner Accessory Holder |
| Brand Status | Authorized SEBO Dealer Ace Vacuums |
Quick Summary
The SEBO Mounting Clip with Screw #1081GS is a genuine OEM replacement part designed to hold the SEBO 1387GS Dusting Brush on compatible SEBO upright vacuum cleaners. It provides a convenient storage location for the dusting brush, helping keep the accessory attached to the vacuum and readily accessible when needed.
Designed for the SEBO 300 Mechanical, 350 Mechanical, 370 Comfort, and Electronic 370 models, this gray/black mounting clip replaces a damaged, broken, loose, or missing original accessory holder.
The mounting clip is supplied with its screw, making it a practical replacement for restoring the intended dusting-brush storage arrangement.
This gray/black mounting clip is specified for the SEBO 300, 350, and 370 series. It includes the mounting screw for installation.
Available from Authorized SEBO Dealer Ace Vacuums.
Compatible Models
The SEBO #1081GS mounting clip is specified for the following vacuum models:
-
SEBO 300 Mechanical
-
SEBO 350 Mechanical
-
SEBO 370 Comfort
-
SEBO Electronic 370
Compatible dusting brush: SEBO 1387GS
The 1387GS is SEBO's gray/black dusting brush with horsehair bristles. The #1081GS mounting clip provides its designated storage attachment on compatible vacuum models.
Important Fitment Information
Although the part is associated with the 300, 350, and 370 model families, always confirm the exact model and existing accessory arrangement before ordering. SEBO uses different mounting clips for different vacuum designs and accessory configurations.
This part should not be confused with other SEBO mounting clips, such as:
-
#6694GS: Mounting clip for K and E dusting brush applications.
-
#5460GS: Mounting clip with screw for specified X and G models.
-
#1081GS: Mounting clip with screw for the 1387GS dusting brush on compatible 300, 350, and 370 models.
If you are unsure which clip your vacuum requires, contact Ace Vacuums with your model number or a photograph of the existing mounting area.
Key Features
-
Genuine SEBO OEM replacement: Original manufacturer mounting clip identified by part number #1081GS.
-
Designed for SEBO 1387GS Dusting Brush: Provides the designated mounting point for storing the compatible dusting brush on the vacuum cleaner.
-
Compatible with selected SEBO models: Specified for SEBO 300 Mechanical, 350 Mechanical, 370 Comfort, and Electronic 370 vacuum models.
-
Mounting screw included: Supplied with the screw required to secure the clip to the designated mounting position.
-
Gray/black finish: Matches the specified color of this SEBO replacement component.
-
Convenient accessory storage: Keeps the dusting brush attached to the vacuum, making it easier to locate and access during cleaning.
-
Replacement for damaged clips: Suitable for replacing a cracked, broken, loose, or missing original mounting holder.
-
Maintains the original accessory arrangement: Helps restore the intended onboard storage position for the SEBO dusting brush.
-
Model-specific fitment: Designed for the listed SEBO 300, 350, and 370 models; checking the vacuum model number before ordering is recommended.
-
Authorized dealer support: Available from Authorized SEBO Dealer Ace Vacuums for genuine SEBO replacement parts and fitment assistance.
Why Genuine OEM Parts Matter
Using genuine SEBO replacement parts helps maintain the intended fit and design of your vacuum cleaner. Small components such as mounting clips may not directly affect suction, but they contribute to accessory organization and everyday convenience.
Correct Fit and Compatibility
The #1081GS is identified for specific SEBO 300, 350, and 370 models. Choosing the correct mounting clip helps ensure that the replacement is appropriate for the vacuum's original accessory-storage arrangement.
Designed for the Specified Accessory
This mounting clip is associated with the SEBO 1387GS Dusting Brush. Using the designated part helps maintain the intended relationship between the vacuum and its onboard cleaning accessory.
Maintains Convenient Accessory Storage
A properly fitted clip keeps the dusting brush attached to the machine when it is not in use. This reduces the need to store the accessory separately and makes it easier to locate during routine cleaning.
Original Manufacturer Replacement
A genuine SEBO component is designed according to the manufacturer's equipment specifications. It is a suitable choice when replacing a damaged or missing original clip.
Purchase genuine replacement components from Authorized SEBO Dealer Ace Vacuums for product guidance and assistance identifying the correct SEBO part.
Replacement Guidance
The mounting clip is a small component, but damage or loss can make it difficult to keep the dusting brush stored on the vacuum.
When Should the Mounting Clip Be Replaced?
Consider replacing the existing clip if:
-
The plastic mounting clip is cracked or broken.
-
The dusting brush no longer stays attached to the vacuum.
-
The clip has become loose or detached.
-
The mounting screw is missing or the holder cannot be secured properly.
-
The original accessory holder has been lost during use or maintenance.
-
The dusting brush storage arrangement needs to be restored after repair.
Installation Considerations
Before installing the replacement:
-
Switch off and unplug the vacuum cleaner.
-
Locate the original dusting-brush mounting position.
-
Remove the damaged clip and existing hardware as needed.
-
Compare the replacement clip with the original mounting location.
-
Position the #1081GS clip and secure it using the supplied screw.
-
Check that the clip is firmly mounted and that the compatible dusting brush can be stored properly.
Avoid overtightening the screw or forcing the clip into position. If the mounting area is damaged, inspect it before installing the replacement.
Fitment reminder: Confirm your vacuum model and part number before ordering. The 1387GS dusting brush is not included with the mounting clip unless specifically stated in the product package details.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SEBO |
| Product Name | Mounting Clip with Screw for Dusting Brush |
| Manufacturer Part Number | 1081GS |
| SKU | 1081GS |
| Product Type | Dusting Brush Mounting Clip |
| Compatible Accessory | SEBO 1387GS Dusting Brush |
| Compatible Models | 300 Mechanical, 350 Mechanical, 370 Comfort, Electronic 370 |
| Compatible Series | SEBO 300, 350, and 370 |
| Color | Gray/Black |
| Mounting Hardware | Screw included |
| Construction | OEM mounting component |
| Replacement Category | Vacuum Cleaner Accessory Holder |
| Brand Status | Authorized SEBO Dealer Ace Vacuums |
Frequently Asked Questions
1. What is the SEBO #1081GS mounting clip used for?
The SEBO #1081GS mounting clip holds the compatible SEBO 1387GS Dusting Brush on the vacuum cleaner. It provides a designated storage location so the brush stays attached to the machine when not in use.
2. Which SEBO vacuum models are compatible with mounting clip #1081GS?
This mounting clip is specified for the SEBO 300 Mechanical, 350 Mechanical, 370 Comfort, and Electronic 370 models. Always verify your exact vacuum model before ordering.
3. Does the SEBO #1081GS mounting clip come with a screw?
Yes. The #1081GS is supplied with its mounting screw, allowing you to secure the replacement clip in the designated mounting position.
4. Is the SEBO 1387GS Dusting Brush included with this mounting clip?
No. This listing is for the #1081GS mounting clip and screw. The SEBO 1387GS Dusting Brush is a separate accessory and must be purchased separately unless otherwise specified.
5. Is SEBO #1081GS a genuine OEM replacement part?
Yes. Part #1081GS is identified as a SEBO mounting clip with screw. Genuine OEM replacement parts are designed for their specified equipment and help maintain the original accessory-storage arrangement.
6. Can I use mounting clip #1081GS on a SEBO K or E series vacuum?
Do not assume that #1081GS fits K or E series machines. This part is specified for selected SEBO 300, 350, and 370 models. Other model families may require a different mounting clip. Check your vacuum's model and part number before purchasing.
7. What are the signs that my SEBO dusting brush mounting clip needs replacement?
Replace the clip if it is cracked, broken, loose, missing, or no longer holds the dusting brush securely. A damaged holder can make it difficult to store the accessory properly.
8. Is the SEBO #1081GS mounting clip difficult to install?
Installation involves positioning the replacement clip at the designated mounting point and securing it with the supplied screw. Switch off and unplug the vacuum before beginning. Avoid overtightening the screw or forcing the clip into place.
9. Will replacing the mounting clip improve my vacuum's suction or cleaning performance?
No. The mounting clip is an accessory-storage component, not a suction or filtration part. Its purpose is to keep the compatible dusting brush attached to the vacuum for convenient access.
10. Where can I buy a genuine SEBO #1081GS mounting clip?
You can purchase the SEBO #1081GS mounting clip with screw from Authorized SEBO Dealer Ace Vacuums. If you are uncertain about compatibility, provide your vacuum model number so the correct replacement part can be identified.
Visit Our Showrooms
Check real-time traffic and travel time from your location in VA, DC, or MD.
📍 AceVacuums Fairfax (DMV Hub)
Address: 11110 Main St, Fairfax, VA 22030
Landmark: Opposite Havertys Furniture Store
Best for: Bethesda, Potomac, Arlington, NW Washington D.C.
📍 AceVacuums Leesburg
Address: 300 Fort Evans Rd NE, Suite 104, Leesburg, VA 20176
Landmark: Next to Home Depot in Leesburg
Best for: Ashburn, Sterling, Frederick MD, Loudoun County
Shipping, Return & Refund Policy
Shipping Policy
In-stock merchandise generally ships from our Leesburg, Virginia location within 3–5 business days. Processing time is separate from carrier transit time and is not a guaranteed delivery date. Weekends and holidays can affect timing. Special-order, backordered or unavailable items may take longer; contact us to confirm timing before purchase when a deadline matters.
Shipping options and charges are shown at checkout. After dispatch, follow the carrier's tracking updates. Weather, carrier delays, order verification and inventory confirmation may affect delivery. Inspect packages promptly and retain packaging if there is damage or an incorrect or missing item.
Returns and refunds
Eligible unused items have a 30-calendar-day return request window for refunds or exchanges, measured from delivery or in-store purchase. Return authorization is required. Final-sale exclusions, the 15% restocking fee for change-of-mind returns and shipping responsibilities are explained in our Return and Refund Policy. That policy is the governing source for return eligibility and fees.
For shipping or return help, email sales@acevacuums.com or call 703-997-9292.
30-Day Returns, Refunds and Exchanges
Updated September 27, 2026. Request a return for an eligible unused item within 30 calendar days of delivery (or purchase for items collected in store). Eligible returns may be refunded to the original payment method or exchanged, subject to availability. The same 30-day request window applies to both refunds and exchanges; there is no separate seven-day or 15-day refund deadline.
Eligibility and authorization
Items must be unused, clean, complete and in their original packaging with all accessories, manuals and proof of purchase. Contact sales@acevacuums.com or 703-997-9292 before sending anything back. Include your order number, item and reason for return. We will confirm eligibility, charges and return instructions. Unapproved or cash-on-delivery returns are not accepted.
Fees and shipping
For an approved change-of-mind return, a 15% restocking fee applies to the returned merchandise price. Original shipping charges are not refundable and the customer pays return shipping. These charges do not apply to an approved return caused by our shipping error or a damaged/defective item claim. Contact us first so we can arrange the appropriate remedy and shipping instructions. Do not assume a prepaid label is included.
Final-sale and excluded items
Air purifiers; discounted, clearance, trade-in, holiday-sale and price-matched purchases; gift cards; custom or special-order products; electrical parts; used or installed items; opened cleaning solutions; and used bags, filters, belts or other consumables are not eligible for change-of-mind returns. Other items clearly marked final sale at purchase are also excluded. An opened box alone does not disqualify an otherwise eligible unused, complete item, but consumables and cleaning solutions must remain unopened.
Damaged, defective, incorrect or missing items; recalls
Inspect your order promptly and contact us as soon as you discover a problem, with your order number and photos where helpful. Keep the packaging. Change-of-mind exclusions and deadlines do not remove applicable defect, warranty, recall or statutory rights. Warranty coverage requires evaluation under the manufacturer's terms; dealer status does not guarantee free repair. Recalled products must follow the manufacturer's recall process.
Refund timing and exchanges
After we receive and inspect the return, we will notify you of approval or the reason it cannot be accepted. Approved refunds are issued to the original payment method within 10 business days of approval; your bank may take additional time to post them. Contact us if more than 15 business days have passed since approval. Exchanges require authorization and replacement availability; any price difference and applicable charges will be explained before processing.
Applicable rights and earlier purchases
This policy applies to online and in-store purchases. We will honor more favorable written return terms provided with an earlier purchase. Applicable consumer rights remain unaffected. Where the European Union 14-day cancellation right applies, customers may cancel or return eligible orders within 14 days of receipt, subject to applicable legal exceptions, without giving a reason.
Your Local Vacuum & Central Vacuum Specialists
Visit AceVacuums in Fairfax and Leesburg, Virginia, for expert buying advice, repairs, warranty support, and replacement parts.
Expert Repairs & Service
- • Belt and brush-roll replacement
- • Motor diagnosis and repair
- • Suction loss and clog removal
- • Bag and filter replacement
- • Central vacuum installation and repair
- • Free repair estimates
Brands We Service
- • Miele, SEBO, Dyson & Riccar
- • Shark, Bissell & Hoover
- • Kirby, Oreck & Simplicity
- • Electrolux
- • MD & BEAM central vacuums
- • Austin Air & Blueair air purifiers
Northern Virginia
- • Fairfax, Burke, Vienna & McLean
- • Reston, Herndon & Chantilly
- • Ashburn, Leesburg & Sterling
- • Purcellville & Aldie
- • Woodbridge, Manassas, Gainesville & Bristow
- • Alexandria & Arlington
Washington, DC & Maryland
Welcoming customers from Washington, D.C., Montgomery County, and Prince George’s County, Maryland. Contact our team for showroom directions or to arrange central vacuum service.
Hablamos Español — Service in English & Spanish.