Sebo Brush Strip Set (2 pcs.) with End Caps for Premium Parquet Brush #7207ER
- Product SKU: 7207ER
- Category: SEBO Vacuum Parts, Vacuum Parts & Accessories
- Order within
Quick Summary
The SEBO Brush Strip Set #7207ER is a genuine OEM replacement kit designed for the SEBO Premium Parquet Brush #7200GS. This set includes two replacement brush strips with end caps, helping restore the original brush configuration when the existing bristles become worn, flattened, or damaged.
The Premium Parquet Brush is designed for cleaning hard floors such as hardwood, tile, laminate, and other smooth flooring surfaces. Its brush strips help loosen dust, dirt, and everyday debris while allowing the nozzle to glide across the floor.
Over time, regular use can cause the bristles to wear down or lose their original shape. Replacing both brush strips helps maintain consistent brush contact and the intended cleaning performance of the parquet attachment.
The #7207ER is the designated replacement set for the SEBO Premium Parquet Brush #7200GS. It is a replacement accessory component, not a complete floor brush.
Available from Authorized SEBO Dealer Ace Vacuums.
Compatible Models
The SEBO #7207ER replacement brush strip set is designed for:
-
SEBO Premium Parquet Brush #7200GS
The #7200GS Premium Parquet Brush is an accessory used with selected SEBO vacuum configurations, including compatible FELIX, DART, and canister models.
Important Compatibility Information
The #7207ER replaces the brush strips installed inside the Premium Parquet Brush #7200GS. Compatibility should be confirmed using the nozzle part number rather than relying only on the vacuum cleaner model.
Before ordering, check the identification of your existing floor brush.
Do not confuse this replacement set with:
-
#7248ER: Brush strip with cap for the SEBO Premium Kombi Nozzle #7260GS.
-
#7207ER: Two-piece brush strip set with end caps for the SEBO Premium Parquet Brush #7200GS.
These replacement sets are designed for different SEBO floor-cleaning attachments.
Key Features
-
Genuine SEBO OEM replacement: Original manufacturer replacement set identified by part number #7207ER.
-
Designed for Premium Parquet Brush: Specifically intended for the SEBO #7200GS floor brush.
-
Two brush strips included: Provides both replacement strips for the parquet brush.
-
End caps included: Supplied with the matching end caps for the replacement assembly.
-
Approximately 12-inch strips: Sized for the compatible Premium Parquet Brush.
-
Supports hard-floor cleaning: Helps maintain the brush's intended contact with smooth floor surfaces.
-
Helps remove everyday debris: Bristles help loosen and collect dust and small particles during vacuuming.
-
Restores worn bristles: Replaces brush strips that have become flattened, uneven, or damaged through regular use.
-
Designed for the original nozzle housing: Helps maintain the intended brush-strip arrangement of the SEBO Premium Parquet Brush.
-
Authorized dealer support: Available from Authorized SEBO Dealer Ace Vacuums for genuine SEBO parts and compatibility assistance.
Why Genuine OEM Parts Matter
The brush strips are important working components of the SEBO Premium Parquet Brush. Choosing the correct genuine replacement helps preserve the intended fit and function of the floor-cleaning attachment.
Correct Fit and Dimensions
The #7207ER is designed specifically for the Premium Parquet Brush #7200GS. Using the correct replacement helps ensure that both strips fit the nozzle's designated mounting channels.
Maintains Brush Contact with the Floor
The brush bristles make contact with the floor to help loosen dust and debris. When the original strips become worn, the brush may no longer make consistent contact. Replacing them helps restore the intended brush arrangement.
Complete Two-Strip Replacement
This set includes two brush strips with end caps, allowing both sides of the parquet brush to be refreshed using the specified replacement components.
Original Manufacturer Compatibility
Genuine SEBO replacement parts are designed for their intended accessories. Choosing the correct OEM set helps avoid problems caused by incorrect strip dimensions or unsuitable replacement components.
Purchase genuine SEBO replacement parts from Authorized SEBO Dealer Ace Vacuums for product guidance and fitment assistance.
Replacement Guidance
Brush strips experience regular contact with floors and can gradually lose their original shape. Periodic inspection helps identify when replacement is needed.
When Should You Replace the Brush Strips?
Consider replacing the strips when:
-
The bristles look flattened or worn, similar to an old toothbrush.
-
Bristles are bent, uneven, or missing.
-
One strip appears more worn than the other.
-
The brush no longer makes consistent contact with the floor.
-
The brush strips are loose or damaged.
-
Cleaning performance has declined and inspection confirms worn brush strips.
How to Replace the SEBO #7207ER Brush Strips
SEBO provides a straightforward replacement method for the Premium Parquet Brush:
-
Switch off and disconnect the vacuum cleaner from the power supply.
-
Remove the Premium Parquet Brush from the vacuum.
-
Locate the yellow release tab on the side of the brush.
-
Press the yellow tab to release the end cap.
-
Pull the old brush strips out of the brush housing. Pliers may help grip a worn strip; alternatively, push the strips from further along the housing.
-
Carefully slide the new brush strips into the housing one at a time.
-
Refit the end cap and check that the strips are seated correctly.
Avoid forcing the strips into the housing. Make sure the end cap is properly secured before using the brush.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SEBO |
| Product Name | Brush Strip Set (2 pcs.) with End Caps |
| Manufacturer Part Number | 7207ER |
| SKU | 7207ER |
| Product Type | Replacement Parquet Brush Strip Set |
| Compatible Brush | SEBO Premium Parquet Brush #7200GS |
| Quantity | 2 brush strips |
| Included Components | Two brush strips with end caps |
| Strip Length | Approximately 12 inches |
| Application | Premium Parquet hard-floor brush |
| Replacement Category | Vacuum Cleaner Accessory Parts |
| Part Type | Genuine OEM replacement |
| Brand Status | Authorized SEBO Dealer Ace Vacuums |
Quick Summary
The SEBO Brush Strip Set #7207ER is a genuine OEM replacement kit designed for the SEBO Premium Parquet Brush #7200GS. This set includes two replacement brush strips with end caps, helping restore the original brush configuration when the existing bristles become worn, flattened, or damaged.
The Premium Parquet Brush is designed for cleaning hard floors such as hardwood, tile, laminate, and other smooth flooring surfaces. Its brush strips help loosen dust, dirt, and everyday debris while allowing the nozzle to glide across the floor.
Over time, regular use can cause the bristles to wear down or lose their original shape. Replacing both brush strips helps maintain consistent brush contact and the intended cleaning performance of the parquet attachment.
The #7207ER is the designated replacement set for the SEBO Premium Parquet Brush #7200GS. It is a replacement accessory component, not a complete floor brush.
Available from Authorized SEBO Dealer Ace Vacuums.
Compatible Models
The SEBO #7207ER replacement brush strip set is designed for:
-
SEBO Premium Parquet Brush #7200GS
The #7200GS Premium Parquet Brush is an accessory used with selected SEBO vacuum configurations, including compatible FELIX, DART, and canister models.
Important Compatibility Information
The #7207ER replaces the brush strips installed inside the Premium Parquet Brush #7200GS. Compatibility should be confirmed using the nozzle part number rather than relying only on the vacuum cleaner model.
Before ordering, check the identification of your existing floor brush.
Do not confuse this replacement set with:
-
#7248ER: Brush strip with cap for the SEBO Premium Kombi Nozzle #7260GS.
-
#7207ER: Two-piece brush strip set with end caps for the SEBO Premium Parquet Brush #7200GS.
These replacement sets are designed for different SEBO floor-cleaning attachments.
Key Features
-
Genuine SEBO OEM replacement: Original manufacturer replacement set identified by part number #7207ER.
-
Designed for Premium Parquet Brush: Specifically intended for the SEBO #7200GS floor brush.
-
Two brush strips included: Provides both replacement strips for the parquet brush.
-
End caps included: Supplied with the matching end caps for the replacement assembly.
-
Approximately 12-inch strips: Sized for the compatible Premium Parquet Brush.
-
Supports hard-floor cleaning: Helps maintain the brush's intended contact with smooth floor surfaces.
-
Helps remove everyday debris: Bristles help loosen and collect dust and small particles during vacuuming.
-
Restores worn bristles: Replaces brush strips that have become flattened, uneven, or damaged through regular use.
-
Designed for the original nozzle housing: Helps maintain the intended brush-strip arrangement of the SEBO Premium Parquet Brush.
-
Authorized dealer support: Available from Authorized SEBO Dealer Ace Vacuums for genuine SEBO parts and compatibility assistance.
Why Genuine OEM Parts Matter
The brush strips are important working components of the SEBO Premium Parquet Brush. Choosing the correct genuine replacement helps preserve the intended fit and function of the floor-cleaning attachment.
Correct Fit and Dimensions
The #7207ER is designed specifically for the Premium Parquet Brush #7200GS. Using the correct replacement helps ensure that both strips fit the nozzle's designated mounting channels.
Maintains Brush Contact with the Floor
The brush bristles make contact with the floor to help loosen dust and debris. When the original strips become worn, the brush may no longer make consistent contact. Replacing them helps restore the intended brush arrangement.
Complete Two-Strip Replacement
This set includes two brush strips with end caps, allowing both sides of the parquet brush to be refreshed using the specified replacement components.
Original Manufacturer Compatibility
Genuine SEBO replacement parts are designed for their intended accessories. Choosing the correct OEM set helps avoid problems caused by incorrect strip dimensions or unsuitable replacement components.
Purchase genuine SEBO replacement parts from Authorized SEBO Dealer Ace Vacuums for product guidance and fitment assistance.
Replacement Guidance
Brush strips experience regular contact with floors and can gradually lose their original shape. Periodic inspection helps identify when replacement is needed.
When Should You Replace the Brush Strips?
Consider replacing the strips when:
-
The bristles look flattened or worn, similar to an old toothbrush.
-
Bristles are bent, uneven, or missing.
-
One strip appears more worn than the other.
-
The brush no longer makes consistent contact with the floor.
-
The brush strips are loose or damaged.
-
Cleaning performance has declined and inspection confirms worn brush strips.
How to Replace the SEBO #7207ER Brush Strips
SEBO provides a straightforward replacement method for the Premium Parquet Brush:
-
Switch off and disconnect the vacuum cleaner from the power supply.
-
Remove the Premium Parquet Brush from the vacuum.
-
Locate the yellow release tab on the side of the brush.
-
Press the yellow tab to release the end cap.
-
Pull the old brush strips out of the brush housing. Pliers may help grip a worn strip; alternatively, push the strips from further along the housing.
-
Carefully slide the new brush strips into the housing one at a time.
-
Refit the end cap and check that the strips are seated correctly.
Avoid forcing the strips into the housing. Make sure the end cap is properly secured before using the brush.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SEBO |
| Product Name | Brush Strip Set (2 pcs.) with End Caps |
| Manufacturer Part Number | 7207ER |
| SKU | 7207ER |
| Product Type | Replacement Parquet Brush Strip Set |
| Compatible Brush | SEBO Premium Parquet Brush #7200GS |
| Quantity | 2 brush strips |
| Included Components | Two brush strips with end caps |
| Strip Length | Approximately 12 inches |
| Application | Premium Parquet hard-floor brush |
| Replacement Category | Vacuum Cleaner Accessory Parts |
| Part Type | Genuine OEM replacement |
| Brand Status | Authorized SEBO Dealer Ace Vacuums |
Frequently Asked Questions
1. What is the SEBO #7207ER brush strip set used for?
The SEBO #7207ER is a replacement set for the Premium Parquet Brush #7200GS. It replaces the original brush strips when the bristles become worn, flattened, or damaged.
2. Which SEBO floor brush is compatible with #7207ER?
The #7207ER brush strip set is designed for the SEBO Premium Parquet Brush #7200GS. Confirm the part number on your existing floor brush before ordering.
3. How many brush strips are included in the SEBO #7207ER set?
The set contains two replacement brush strips with end caps for the Premium Parquet Brush.
4. Are the end caps included with the replacement brush strips?
Yes. The #7207ER is identified as a two-piece brush strip set with end caps.
5. What is the length of the SEBO #7207ER brush strips?
The replacement brush strips are approximately 12 inches long and are sized for the compatible Premium Parquet Brush.
6. Can I use #7207ER with a SEBO Premium Kombi Nozzle?
No. The #7207ER is designed for the Premium Parquet Brush #7200GS. The Premium Kombi Nozzle #7260GS uses a different replacement component, #7248ER.
7. When should I replace the Premium Parquet Brush strips?
Replace them when the bristles become flattened, bent, uneven, or visibly worn. SEBO recommends replacement when the bristles begin to look like a worn toothbrush.
8. How do I remove the old brush strips?
Press the yellow tab on the side of the Premium Parquet Brush to release the end cap. Then pull the old strips out of the housing. Pliers can help grip the strips if necessary.
9. Can I replace the brush strips myself?
Yes. The replacement process involves releasing the end cap, removing the old strips, inserting the new strips, and securing the cap. Follow the instructions carefully and do not force the replacement components.
10. Where can I buy genuine SEBO #7207ER brush strips?
You can purchase the SEBO #7207ER replacement brush strip set from Authorized SEBO Dealer Ace Vacuums. If you need help confirming whether your existing attachment is the compatible #7200GS Premium Parquet Brush, contact Ace Vacuums for assistance.
Visit Our Showrooms
Check real-time traffic and travel time from your location in VA, DC, or MD.
📍 AceVacuums Fairfax (DMV Hub)
Address: 11110 Main St, Fairfax, VA 22030
Landmark: Opposite Havertys Furniture Store
Best for: Bethesda, Potomac, Arlington, NW Washington D.C.
📍 AceVacuums Leesburg
Address: 300 Fort Evans Rd NE, Suite 104, Leesburg, VA 20176
Landmark: Next to Home Depot in Leesburg
Best for: Ashburn, Sterling, Frederick MD, Loudoun County
Shipping, Return & Refund Policy
Shipping Policy
In-stock merchandise generally ships from our Leesburg, Virginia location within 3–5 business days. Processing time is separate from carrier transit time and is not a guaranteed delivery date. Weekends and holidays can affect timing. Special-order, backordered or unavailable items may take longer; contact us to confirm timing before purchase when a deadline matters.
Shipping options and charges are shown at checkout. After dispatch, follow the carrier's tracking updates. Weather, carrier delays, order verification and inventory confirmation may affect delivery. Inspect packages promptly and retain packaging if there is damage or an incorrect or missing item.
Returns and refunds
Eligible unused items have a 30-calendar-day return request window for refunds or exchanges, measured from delivery or in-store purchase. Return authorization is required. Final-sale exclusions, the 15% restocking fee for change-of-mind returns and shipping responsibilities are explained in our Return and Refund Policy. That policy is the governing source for return eligibility and fees.
For shipping or return help, email sales@acevacuums.com or call 703-997-9292.
30-Day Returns, Refunds and Exchanges
Updated September 27, 2026. Request a return for an eligible unused item within 30 calendar days of delivery (or purchase for items collected in store). Eligible returns may be refunded to the original payment method or exchanged, subject to availability. The same 30-day request window applies to both refunds and exchanges; there is no separate seven-day or 15-day refund deadline.
Eligibility and authorization
Items must be unused, clean, complete and in their original packaging with all accessories, manuals and proof of purchase. Contact sales@acevacuums.com or 703-997-9292 before sending anything back. Include your order number, item and reason for return. We will confirm eligibility, charges and return instructions. Unapproved or cash-on-delivery returns are not accepted.
Fees and shipping
For an approved change-of-mind return, a 15% restocking fee applies to the returned merchandise price. Original shipping charges are not refundable and the customer pays return shipping. These charges do not apply to an approved return caused by our shipping error or a damaged/defective item claim. Contact us first so we can arrange the appropriate remedy and shipping instructions. Do not assume a prepaid label is included.
Final-sale and excluded items
Air purifiers; discounted, clearance, trade-in, holiday-sale and price-matched purchases; gift cards; custom or special-order products; electrical parts; used or installed items; opened cleaning solutions; and used bags, filters, belts or other consumables are not eligible for change-of-mind returns. Other items clearly marked final sale at purchase are also excluded. An opened box alone does not disqualify an otherwise eligible unused, complete item, but consumables and cleaning solutions must remain unopened.
Damaged, defective, incorrect or missing items; recalls
Inspect your order promptly and contact us as soon as you discover a problem, with your order number and photos where helpful. Keep the packaging. Change-of-mind exclusions and deadlines do not remove applicable defect, warranty, recall or statutory rights. Warranty coverage requires evaluation under the manufacturer's terms; dealer status does not guarantee free repair. Recalled products must follow the manufacturer's recall process.
Refund timing and exchanges
After we receive and inspect the return, we will notify you of approval or the reason it cannot be accepted. Approved refunds are issued to the original payment method within 10 business days of approval; your bank may take additional time to post them. Contact us if more than 15 business days have passed since approval. Exchanges require authorization and replacement availability; any price difference and applicable charges will be explained before processing.
Applicable rights and earlier purchases
This policy applies to online and in-store purchases. We will honor more favorable written return terms provided with an earlier purchase. Applicable consumer rights remain unaffected. Where the European Union 14-day cancellation right applies, customers may cancel or return eligible orders within 14 days of receipt, subject to applicable legal exceptions, without giving a reason.
Your Local Vacuum & Central Vacuum Specialists
Visit AceVacuums in Fairfax and Leesburg, Virginia, for expert buying advice, repairs, warranty support, and replacement parts.
Expert Repairs & Service
- • Belt and brush-roll replacement
- • Motor diagnosis and repair
- • Suction loss and clog removal
- • Bag and filter replacement
- • Central vacuum installation and repair
- • Free repair estimates
Brands We Service
- • Miele, SEBO, Dyson & Riccar
- • Shark, Bissell & Hoover
- • Kirby, Oreck & Simplicity
- • Electrolux
- • MD & BEAM central vacuums
- • Austin Air & Blueair air purifiers
Northern Virginia
- • Fairfax, Burke, Vienna & McLean
- • Reston, Herndon & Chantilly
- • Ashburn, Leesburg & Sterling
- • Purcellville & Aldie
- • Woodbridge, Manassas, Gainesville & Bristow
- • Alexandria & Arlington
Washington, DC & Maryland
Welcoming customers from Washington, D.C., Montgomery County, and Prince George’s County, Maryland. Contact our team for showroom directions or to arrange central vacuum service.
Hablamos Español — Service in English & Spanish.