Heavy‑Duty Metal Roller Brush for Simplicity 7000 Series – #D012‑0500B
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Heavy‑Duty Metal Roller Brush for Simplicity 7000 Series – #D012‑0500B

Available: In Stock
Image
  • Order within

Product Overview

The Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is a replacement agitator designed specifically for Simplicity upright vacuums in the 7000 line that use a non‑clutch (always-engaged) brush roll. Its all-metal core and robust design make it ideal for homes with pets, long hair, or heavy daily vacuuming. Built for durability, this brush meets OEM tolerances and is offered through Authorized Dealer Ace Vacuums (in store and online) to ensure genuine quality.


Key Features

  • All‑metal shaft and construction for enhanced strength and longevity

  • Precise OEM dimensions matching Simplicity factory specs

  • Non‑clutch design (always rotating) to suit models without brush on/off switch

  • Red backing with gold nylon bristles (≈10.3 mm length) for deep carpet penetration

  • Dual ball bearings for smooth rotation

  • Direct-fit replacement — no modification needed

  • Balanced construction to minimize vibration and noise

  • Compatible with belt and pulley systems of the 7000 series models

  • Backed by Ace Vacuums’ guarantee of authenticity


What Makes This Model Stand Out

  • Many roller brushes on the market use plastic or hybrid constructions; the #D012‑0500B uses a fully metallic core which resists bending and wear over time.

  • Because it is non‑clutch, it eliminates mechanical clutch parts that could fail or require maintenance (for machines designed for non‑clutch operation).

  • It maintains OEM tolerances for balance and runout, contributing to quieter operation, less drag on the belt, and longer motor life.

  • Sourced through Authorized Dealer Ace Vacuums, so quality is assured and warranty support is straightforward.


Technical Specifications

Specification Detail
Model / Part Number Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B
Type Non‐clutch / always-engaged roller brush (agitator)
Shaft Material Steel / metal alloy
Bristle Strip Red backing, gold nylon bristles (~10.3 mm length)
Bearings Dual ball bearings (one each end)
Fit / Compatibility Fits Simplicity 7000 series uprights using non‑clutch brush roll
Outside Diameter Matches OEM  (approx same as original)
Length OEM length (equal to factory roller)
Weight Approx same as factory brush (metal construction adds weight)
Balance tolerance Within OEM allowed runout (less than ~0.1 mm)
Warranty As per Ace Vacuums / OEM policies (if genuine part)

Ideal Buyers

This roller brush is ideal for:

  • Owners of Simplicity 7000 series upright vacuums (non-clutch models) needing a replacement agitator

  • Users in households with pets, shedding hair, or long hair

  • Customers wanting a durable, long-lasting metal roller rather than plastic ones

  • People who prefer to buy from an Authorized Dealer Ace Vacuums to ensure genuine parts and support

  • Vacuum service centers or repair shops that service Simplicity vacuums


Availability & Ordering

  • You can purchase the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B through Ace Vacuums In‑Store (visit your local Ace Vacuums showroom or parts counter).

  • Also available via Ace Vacuums Online store (with shipping) as part of their genuine Simplicity parts catalog.

  • Because it is a genuine OEM or OEM‑grade part, stock may be limited. Always check current availability before advertising.

  • Ace Vacuums, as an Authorized Dealer, can also arrange special orders or backorders from the manufacturer if out of stock.

  • Local pickup (if your city is served) helps reduce wait time and shipping cost.


Pros and Cons

Pros

  • Excellent durability thanks to metal construction

  • OEM precision fit reduces vibration and noise

  • Perfect for pet hair / heavy use situations

  • No clutch to fail in models that don’t support it

  • Warranty & authenticity assured via Authorized Dealer Ace Vacuums

  • Easier to service or re-bristle if needed

Cons

  • Slightly heavier than plastic versions (may cause more belt load)

  • Only works for non‑clutch Simplicity 7000 models — not universal

  • If the bearing fails, the whole unit must be replaced

  • More expensive than generic or knockoff rollers

  • For models with brush-off switch, this part is incompatible


Comparison Table

Feature Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B Generic Plastic Roller Brush Clutch‑compatible Roller (e.g. D012‑2700)
Core Material Metal (steel) Plastic or hybrid Metal core (with clutch parts)
Durability High Moderate High (with clutch reliability risks)
Compatibility Non-clutch 7000 series models Varies, less reliable fit Clutch/models with brush-off switch
Weight Heavier Lighter Moderate-to-heavy
Vibration / Balance OEM-balanced Likely more vibration Needs precise clutch alignment
Maintenance Easier to re‑bush Often non-serviceable More complex (clutch parts may wear)
Cost Higher Lower Moderate to higher
Risk of Failure Low core risk, bearing is failure point Warping, core failure Clutch failure risk
Use in pet households Excellent Decent (shorter life) Good if clutch holds up
Dealer / Warranty Support Strong via Authorized Dealer Ace Vacuums Often none Depends on part and brand

Frequently Asked Questions (FAQs)

  1. Q: Is the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B compatible with all 7000 series vacuums?
    A: The Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is compatible only with 7000 series models that use a non‑clutch (always-on) brush roll system. It is not suitable for 7000 series vacuums that have a brush-on/off switch or clutch mechanism.

  2. Q: Why should I buy the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B from an Authorized Dealer Ace Vacuums?
    A: Purchasing from Authorized Dealer Ace Vacuums ensures you receive a genuine or OEM-grade part that meets manufacturer tolerances, and you retain warranty support and authenticity assurance that aftermarket or third-party sellers may not provide.

  3. Q: How often should I replace the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: Under normal home use, the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B may last several years. You should inspect it once or twice a year; replace when bristles are worn down, bearings are noisy, or balance is off. If purchased through Authorized Dealer Ace Vacuums, replacement support is easier.

  4. Q: Can the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B handle pet hair?
    A: Yes — the metal core and robust bristles of the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B are ideal for homes with pets. The design resists warping or bending under dense hair loads better than plastic rollers.

  5. Q: How do I install the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: To install the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B, unplug your vacuum, remove the bottom cover, slide out the old roller (releasing belts and end caps), insert the new one in place, reattach the belt, and close the cover. If you purchased from Authorized Dealer Ace Vacuums, they can provide installation guidance or videos.

  6. Q: Does Ace Vacuums offer service or warranty for the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: Yes. As Authorized Dealer Ace Vacuums, we offer warranty support on this roller brush, assistance with returns or replacements, and in-store or online service for related vacuum repair needs.

  7. Q: What if the bearing fails on the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: If the bearing in your Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B fails, the entire roller must typically be replaced (bearings are not easily user‑replaceable). Because you purchased from Authorized Dealer Ace Vacuums, you can claim support, replacements, or warranty service.

  8. Q: Can I get same-day pickup of the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B at Ace Vacuums in-store?
    A: Yes — if the roller brush is in stock at your local Ace Vacuums showroom, Authorized Dealer Ace Vacuums allows you to pick it up the same day. You can also order it online for in-store pickup (if available).

  9. Q: How does #D012‑0500B differ from other Simplicity roller brushes like D012‑2700?
    A: The Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is non‑clutch and always spins. The D012‑2700 is a clutch version (for models with brush shut-off switches). Using the wrong one (clutch vs non-clutch) can result in improper performance or mechanical issues. As Authorized Dealer Ace Vacuums, we can help match the correct version for your machine.

  10. Q: What happens if I install the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B in a model meant for a clutch roller?
    A: Installing the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B in a model that requires a clutch roller may cause the brush to spin constantly, leading to poor performance, damage to the belt or flooring, or void warranty. Always confirm compatibility. Authorized Dealer Ace Vacuums can assist you to verify model compatibility before you buy.

  11. Q: Is the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B balanced and quiet?
    A: Yes — because it is manufactured to OEM tolerances, the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is well-balanced, resulting in relatively low vibration and noise. If you notice excessive noise, it might indicate misalignment, worn bearings, or belt issues (which Ace Vacuums service can diagnose).

  12. Q: Does the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B come with instructions or support from Ace Vacuums?
    A: Yes — when purchasing the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B via Authorized Dealer Ace Vacuums, we provide installation instructions, compatibility info, or video guides on request. Our in-store staff can also help you with fitment or setup.

Product Overview

The Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is a replacement agitator designed specifically for Simplicity upright vacuums in the 7000 line that use a non‑clutch (always-engaged) brush roll. Its all-metal core and robust design make it ideal for homes with pets, long hair, or heavy daily vacuuming. Built for durability, this brush meets OEM tolerances and is offered through Authorized Dealer Ace Vacuums (in store and online) to ensure genuine quality.


Key Features

  • All‑metal shaft and construction for enhanced strength and longevity

  • Precise OEM dimensions matching Simplicity factory specs

  • Non‑clutch design (always rotating) to suit models without brush on/off switch

  • Red backing with gold nylon bristles (≈10.3 mm length) for deep carpet penetration

  • Dual ball bearings for smooth rotation

  • Direct-fit replacement — no modification needed

  • Balanced construction to minimize vibration and noise

  • Compatible with belt and pulley systems of the 7000 series models

  • Backed by Ace Vacuums’ guarantee of authenticity


What Makes This Model Stand Out

  • Many roller brushes on the market use plastic or hybrid constructions; the #D012‑0500B uses a fully metallic core which resists bending and wear over time.

  • Because it is non‑clutch, it eliminates mechanical clutch parts that could fail or require maintenance (for machines designed for non‑clutch operation).

  • It maintains OEM tolerances for balance and runout, contributing to quieter operation, less drag on the belt, and longer motor life.

  • Sourced through Authorized Dealer Ace Vacuums, so quality is assured and warranty support is straightforward.


Technical Specifications

Specification Detail
Model / Part Number Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B
Type Non‐clutch / always-engaged roller brush (agitator)
Shaft Material Steel / metal alloy
Bristle Strip Red backing, gold nylon bristles (~10.3 mm length)
Bearings Dual ball bearings (one each end)
Fit / Compatibility Fits Simplicity 7000 series uprights using non‑clutch brush roll
Outside Diameter Matches OEM  (approx same as original)
Length OEM length (equal to factory roller)
Weight Approx same as factory brush (metal construction adds weight)
Balance tolerance Within OEM allowed runout (less than ~0.1 mm)
Warranty As per Ace Vacuums / OEM policies (if genuine part)

Ideal Buyers

This roller brush is ideal for:

  • Owners of Simplicity 7000 series upright vacuums (non-clutch models) needing a replacement agitator

  • Users in households with pets, shedding hair, or long hair

  • Customers wanting a durable, long-lasting metal roller rather than plastic ones

  • People who prefer to buy from an Authorized Dealer Ace Vacuums to ensure genuine parts and support

  • Vacuum service centers or repair shops that service Simplicity vacuums


Availability & Ordering

  • You can purchase the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B through Ace Vacuums In‑Store (visit your local Ace Vacuums showroom or parts counter).

  • Also available via Ace Vacuums Online store (with shipping) as part of their genuine Simplicity parts catalog.

  • Because it is a genuine OEM or OEM‑grade part, stock may be limited. Always check current availability before advertising.

  • Ace Vacuums, as an Authorized Dealer, can also arrange special orders or backorders from the manufacturer if out of stock.

  • Local pickup (if your city is served) helps reduce wait time and shipping cost.


Pros and Cons

Pros

  • Excellent durability thanks to metal construction

  • OEM precision fit reduces vibration and noise

  • Perfect for pet hair / heavy use situations

  • No clutch to fail in models that don’t support it

  • Warranty & authenticity assured via Authorized Dealer Ace Vacuums

  • Easier to service or re-bristle if needed

Cons

  • Slightly heavier than plastic versions (may cause more belt load)

  • Only works for non‑clutch Simplicity 7000 models — not universal

  • If the bearing fails, the whole unit must be replaced

  • More expensive than generic or knockoff rollers

  • For models with brush-off switch, this part is incompatible


Comparison Table

Feature Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B Generic Plastic Roller Brush Clutch‑compatible Roller (e.g. D012‑2700)
Core Material Metal (steel) Plastic or hybrid Metal core (with clutch parts)
Durability High Moderate High (with clutch reliability risks)
Compatibility Non-clutch 7000 series models Varies, less reliable fit Clutch/models with brush-off switch
Weight Heavier Lighter Moderate-to-heavy
Vibration / Balance OEM-balanced Likely more vibration Needs precise clutch alignment
Maintenance Easier to re‑bush Often non-serviceable More complex (clutch parts may wear)
Cost Higher Lower Moderate to higher
Risk of Failure Low core risk, bearing is failure point Warping, core failure Clutch failure risk
Use in pet households Excellent Decent (shorter life) Good if clutch holds up
Dealer / Warranty Support Strong via Authorized Dealer Ace Vacuums Often none Depends on part and brand

Frequently Asked Questions (FAQs)

  1. Q: Is the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B compatible with all 7000 series vacuums?
    A: The Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is compatible only with 7000 series models that use a non‑clutch (always-on) brush roll system. It is not suitable for 7000 series vacuums that have a brush-on/off switch or clutch mechanism.

  2. Q: Why should I buy the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B from an Authorized Dealer Ace Vacuums?
    A: Purchasing from Authorized Dealer Ace Vacuums ensures you receive a genuine or OEM-grade part that meets manufacturer tolerances, and you retain warranty support and authenticity assurance that aftermarket or third-party sellers may not provide.

  3. Q: How often should I replace the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: Under normal home use, the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B may last several years. You should inspect it once or twice a year; replace when bristles are worn down, bearings are noisy, or balance is off. If purchased through Authorized Dealer Ace Vacuums, replacement support is easier.

  4. Q: Can the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B handle pet hair?
    A: Yes — the metal core and robust bristles of the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B are ideal for homes with pets. The design resists warping or bending under dense hair loads better than plastic rollers.

  5. Q: How do I install the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: To install the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B, unplug your vacuum, remove the bottom cover, slide out the old roller (releasing belts and end caps), insert the new one in place, reattach the belt, and close the cover. If you purchased from Authorized Dealer Ace Vacuums, they can provide installation guidance or videos.

  6. Q: Does Ace Vacuums offer service or warranty for the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: Yes. As Authorized Dealer Ace Vacuums, we offer warranty support on this roller brush, assistance with returns or replacements, and in-store or online service for related vacuum repair needs.

  7. Q: What if the bearing fails on the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B?
    A: If the bearing in your Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B fails, the entire roller must typically be replaced (bearings are not easily user‑replaceable). Because you purchased from Authorized Dealer Ace Vacuums, you can claim support, replacements, or warranty service.

  8. Q: Can I get same-day pickup of the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B at Ace Vacuums in-store?
    A: Yes — if the roller brush is in stock at your local Ace Vacuums showroom, Authorized Dealer Ace Vacuums allows you to pick it up the same day. You can also order it online for in-store pickup (if available).

  9. Q: How does #D012‑0500B differ from other Simplicity roller brushes like D012‑2700?
    A: The Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is non‑clutch and always spins. The D012‑2700 is a clutch version (for models with brush shut-off switches). Using the wrong one (clutch vs non-clutch) can result in improper performance or mechanical issues. As Authorized Dealer Ace Vacuums, we can help match the correct version for your machine.

  10. Q: What happens if I install the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B in a model meant for a clutch roller?
    A: Installing the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B in a model that requires a clutch roller may cause the brush to spin constantly, leading to poor performance, damage to the belt or flooring, or void warranty. Always confirm compatibility. Authorized Dealer Ace Vacuums can assist you to verify model compatibility before you buy.

  11. Q: Is the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B balanced and quiet?
    A: Yes — because it is manufactured to OEM tolerances, the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B is well-balanced, resulting in relatively low vibration and noise. If you notice excessive noise, it might indicate misalignment, worn bearings, or belt issues (which Ace Vacuums service can diagnose).

  12. Q: Does the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B come with instructions or support from Ace Vacuums?
    A: Yes — when purchasing the Simplicity 7000 Series Roller Brush Metal Non‑Clutch #D012‑0500B via Authorized Dealer Ace Vacuums, we provide installation instructions, compatibility info, or video guides on request. Our in-store staff can also help you with fitment or setup.

Ace Vacuums Locations:

  • Fairfax, VA: 11110 Main Street, Fairfax, VA 22030
  • Leesburg, VA: 300 Fort Evans Rd NE, Leesburg, VA 20176

Driving Directions to Ace Vacuums in Fairfax, VA (11110 Main Street, Fairfax, VA 22030)

From Maryland (e.g., Bethesda, Silver Spring, Rockville):

  1. Start on I-495 S (Capital Beltway Inner Loop): Head south on I-495 towards Northern Virginia.
  2. Take Exit 45 A-B for VA-267 W (Dulles Toll Road): Follow signs for VA-267 West (Dulles Toll Road). Be aware this is a toll road.
  3. Continue on VA-267 W: Stay on the Dulles Toll Road for several miles.
  4. Take Exit 16 for VA-7 E (Leesburg Pike) / VA-123 S (Chain Bridge Rd): Follow signs for VA-123 South (Chain Bridge Rd).
  5. Merge onto VA-123 S (Chain Bridge Rd): Continue south on Chain Bridge Road.
  6. Turn Right onto Main Street (VA-236 W): This will be a significant intersection. You'll continue on Main Street for a short distance.
  7. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store. Look for their prominent signage.

From Washington D.C. (e.g., Downtown D.C.):

  1. Take I-66 W toward Vienna/Centreville/Fairfax: Get onto I-66 West.
  2. Take Exit 60 for VA-123 S (Chain Bridge Rd) toward Fairfax: Follow the exit ramp.
  3. Turn Right onto VA-123 S (Chain Bridge Rd): Continue south on Chain Bridge Road.
  4. Turn Right onto Main Street (VA-236 W): This will be a significant intersection.
  5. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store.

From Northern Virginia (e.g., Arlington, Falls Church, Vienna):

  • From Arlington/Falls Church:
    1. Take US-50 W (Arlington Blvd) or VA-236 W (Main Street) directly into Fairfax: Depending on your starting point, either of these roads will lead you directly to Fairfax.
    2. Continue on Main Street (VA-236 W):
    3. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store.
  • From Vienna:
    1. Take VA-123 S (Chain Bridge Rd) toward Fairfax: Head south on Chain Bridge Road.
    2. Turn Right onto Main Street (VA-236 W):
    3. Ace Vacuums Fairfax: Ace Vacuums will be on your left side, directly opposite Havertys Furniture Store.
  • From Areas West/Northwest of Fairfax (e.g., Chantilly, Centreville):
    1. Take US-50 E or I-66 E towards Fairfax.
    2. If on I-66 E, take Exit 60 for VA-123 S (Chain Bridge Rd). Turn left onto Chain Bridge Rd, then right onto Main Street.
    3. If on US-50 E, turn right onto Main Street (VA-236 E) in Fairfax.
    4. Ace Vacuums Fairfax: Ace Vacuums will be on your right side if coming from US-50 E/VA-236 E, shortly after crossing VA-123. Look for Havertys Furniture Store on your left.

Driving Directions to Ace Vacuums in Leesburg, VA (300 Fort Evans Rd NE, Leesburg, VA 20176)

From Maryland (e.g., Bethesda, Silver Spring, Rockville):

  1. Start on I-495 S (Capital Beltway Inner Loop): Head south on I-495 towards Northern Virginia.
  2. Take Exit 45 A-B for VA-267 W (Dulles Toll Road): Follow signs for VA-267 West (Dulles Toll Road). Be aware this is a toll road.
  3. Continue on VA-267 W (Dulles Toll Road/Dulles Greenway): Stay on VA-267 West. This road transitions from the Dulles Toll Road to the Dulles Greenway as you head further west into Loudoun County. Tolls apply for both sections.
  4. Take Exit 1A for VA-7 W (Harry Byrd Hwy) toward Leesburg: This is a major exit.
  5. Continue on VA-7 W: You'll drive for several miles, passing through Sterling and Ashburn.
  6. Take the Exit for Battlefield Parkway / Fort Evans Road: As you approach Leesburg, look for this exit.
  7. Turn Right onto Fort Evans Rd NE: After exiting, turn right onto Fort Evans Road NE.
  8. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.

From Washington D.C. (e.g., Downtown D.C.):

  1. Take I-66 W toward Vienna/Centreville: Get onto I-66 West.
  2. Merge onto VA-267 W (Dulles Toll Road): Follow signs for VA-267 West (Dulles Toll Road). Tolls apply.
  3. Continue onto VA-267 W (Dulles Greenway): Stay on the Dulles Greenway. Tolls apply.
  4. Take Exit 1A for VA-7 W (Harry Byrd Hwy) toward Leesburg:
  5. Continue on VA-7 W:
  6. Take the Exit for Battlefield Parkway / Fort Evans Road:
  7. Turn Right onto Fort Evans Rd NE:
  8. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.

From Northern Virginia (e.g., Fairfax, Arlington, Ashburn, Sterling):

  • From Fairfax:
    1. Take VA-123 N (Chain Bridge Rd) to access VA-267 W (Dulles Toll Road) or take I-66 W to VA-267 W: Your best bet is to get onto VA-267 West (Dulles Toll Road).
    2. Continue on VA-267 W (Dulles Toll Road/Dulles Greenway): Tolls apply.
    3. Take Exit 1A for VA-7 W (Harry Byrd Hwy) toward Leesburg:
    4. Continue on VA-7 W:
    5. Take the Exit for Battlefield Parkway / Fort Evans Road:
    6. Turn Right onto Fort Evans Rd NE:
    7. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.
  • From Ashburn / Sterling / Eastern Loudoun County:
    1. Take VA-7 W (Harry Byrd Hwy) directly toward Leesburg: This is the most direct route.
    2. Take the Exit for Battlefield Parkway / Fort Evans Road:
    3. Turn Right onto Fort Evans Rd NE:
    4. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot, and directly across from the Leesburg Premium Outlets.
  • From Western Virginia (e.g., Winchester):
    1. Take US-7 E (Harry Byrd Hwy) toward Leesburg:
    2. In Leesburg, after passing the Leesburg Premium Outlets on your left, prepare for the Fort Evans Road / Battlefield Parkway exit.
    3. Take the Exit for Fort Evans Road / Battlefield Parkway.
    4. Turn Left onto Fort Evans Rd NE: You'll go over VA-7.
    5. Ace Vacuums Leesburg: Ace Vacuums will be on your right side, located next to the Home Depot.

Shipping Policy

 
We ship all merchandise in stock within 3-5 business days from 300 Fort Evans Rd NE, Leesburg VA during our regular business hours of Monday to Friday 10-7 PM EST.


Return Policy

  • Report Issues Promptly: Inspect your shipment upon arrival. Any shortages or defects must be reported within 7 days of delivery or they cannot be addressed.

  • Return Window: Unused items in their original packaging may be returned within 15 days of delivery for a full refund. After 15 days and up to 30 days, only an exchange or store credit is offered, provided the item is unused and in its original packaging. Products returned beyond 30 days will not be accepted.

  • Restocking Fees: A standard restocking fee of 15 % applies to all approved returns. Used, damaged, or incomplete items may incur a restocking fee of up to 50 % or be refused entirely.

  • Final Sale Items: All discounted items, trade‑ins, holiday promotions, price‑matched goods, and air purifiers are final sale and not eligible for return or exchange.

  • No Cash Refunds: Refunds will be issued to the original payment method. Shipping charges are non‑refundable and return shipping is the customer’s responsibility unless the return is due to our error.

  • Return Authorization Required: Before returning any item, you must contact our customer service at 1‑888‑606‑8885 (Mon–Fri, 10 a.m.–7 p.m. EST) to obtain return instructions and the correct return address. Unauthorized or COD returns will not be accepted.

  • Processing Time: Once your return is received and inspected, please allow up to 10 business days for processing.

    We recommend including a copy of your receipt and your contact information with all returns to ensure prompt service.


Visit Ace Vacuums, an authorized dealer and warranty center for Miele, SEBO, Dyson, Riccar, Simplicity, Hoover, Kenmore, Shark, Bissell, Oreck, Kirby, Electrolux, Titan, MD Central Vacuums & more!. We provide expert vacuum repair, warranty service, and same-day repairs (if parts are available), all performed by certified technicians. Ace Vacuums specializes in central vacuum sales, installation & repairs. As an authorized dealer for MD, Beam, Cana-Vac, CycloVac, VacuMaid & more, we provide system upgrades, genuine centralvac parts & expert service. Get free repair estimates and genuine replacement parts for all vacuum brands.  ....